[PATCH v2 2/2] arm64: dts: mba8mx: change sound card model name
Alexander Stein
alexander.stein at ew.tq-group.com
Mon Feb 24 07:00:15 PST 2025
From: Markus Niebel <Markus.Niebel at ew.tq-group.com>
The card name for ALSA is generated from the model name string and
is limited to 16 characters. Use a shorter name to prevent cutting the
name.
Since nearly all starter kit mainboards for i.MX based SoM by TQ-Systems
use the same codec with the same routing on board it is a good idea to
use the same model name for the sound card. This allows sharing a default
asound.conf in BSP over all the kits.
Signed-off-by: Markus Niebel <Markus.Niebel at ew.tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein at ew.tq-group.com>
---
arch/arm64/boot/dts/freescale/mba8mx.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/freescale/mba8mx.dtsi b/arch/arm64/boot/dts/freescale/mba8mx.dtsi
index 58e3865c28895..7ee1228a50f4f 100644
--- a/arch/arm64/boot/dts/freescale/mba8mx.dtsi
+++ b/arch/arm64/boot/dts/freescale/mba8mx.dtsi
@@ -138,7 +138,7 @@ reg_vcc_3v3: regulator-3v3 {
sound {
compatible = "fsl,imx-audio-tlv320aic32x4";
- model = "imx-audio-tlv320aic32x4";
+ model = "tqm-tlv320aic32";
ssi-controller = <&sai3>;
audio-codec = <&tlv320aic3x04>;
};
--
2.43.0
More information about the linux-arm-kernel
mailing list