[PATCH v3 6/9] iio: adc: rzg2l_adc: Use adc-helpers

[Matti Vaittinen]

On 23/02/2025 18:30, Jonathan Cameron wrote:
> On Wed, 19 Feb 2025 14:31:38 +0200
> Matti Vaittinen <mazziesaccount at gmail.com> wrote:
> 
>> The new devm_iio_adc_device_alloc_chaninfo() -helper is intended to help
>> drivers avoid open-coding the for_each_node -loop for getting the
>> channel IDs. The helper provides standard way to detect the ADC channel
>> nodes (by the node name), and a standard way to convert the "reg",
>> "diff-channels", "single-channel" and the "common-mode-channel" to
>> channel identification numbers used in the struct iio_chan_spec.
>> Furthermore, the helper checks the ID is in range of 0 ... num-channels.
>>
>> The original driver treated all found child nodes as channel nodes. The
>> new helper requires channel nodes to be named channel[@N]. This should
>> help avoid problems with devices which may contain also other but ADC
>> child nodes. Quick grep from arch/* with the rzg2l_adc's compatible
>> string didn't reveal any in-tree .dts with channel nodes named
>> othervice. Also, same grep shows all the .dts seem to have channel IDs
>> between 0..num of channels.
>>
>> Use the new helper.
>>
>> Signed-off-by: Matti Vaittinen <mazziesaccount at gmail.com>
> 
> I should have read on.  Definitely more convincing with these usecases.
> however drag them to start of series.  Better to add infrastructure
> so some use and then on to your new driver.

Ok. I'll reorder the series.

I'll drop the differential channels support in v4 - and thus also the 
expected property types parameters - which will simplify this and other 
callers.

Thanks for taking a look at this!

Yours,
	-- Matti