[PATCH 0/9] arm64: dts: rockchip: align and reorganize Theobroma DTS(I)

[Heiko Stuebner]

On Tue, 18 Feb 2025 12:49:11 +0100, Quentin Schulz wrote:
> We have three SoMs that can use Haikou as their carrierboard so it'd be
> nice to have consistency across SoMs on what's enabled by default. To
> that end, Tiger Haikou now has UART5 enabled and Puma Haikou now has the
> EEPROM found on Haikou specified.
> 
> Additionally, some devices were configured or enabled in the wrong
> places (either SoM DTSI when they needed to be configured in
> carrierboard DTS or vice-versa). This moves things around to better
> match actual HW definition and make it easier to reuse the SoM DTSI
> without having to undo carrierboard-specific changes. While at it,
> disable devices/buses exposed on connectors which do not have overlays.
> They need to be enabled in the appropriate overlays whenever they will
> be added.
> 
> [...]

Applied, thanks!

[1/9] arm64: dts: rockchip: enable UART5 on RK3588 Tiger Haikou
[2/9] arm64: dts: rockchip: move DDC bus from Haikou carrierboard to RK3399 Puma DTSI
[3/9] arm64: dts: rockchip: move I2C6 from Haikou carrierboard to Puma DTSI
[4/9] arm64: dts: rockchip: disable I2C6 on Puma DTSI
[5/9] arm64: dts: rockchip: enable I2S0 in Haikou carrierboard, not Puma DTSI
[6/9] arm64: dts: rockchip: add EEPROM found on RK3399 Puma Haikou
[7/9] arm64: dts: rockchip: enable Ethernet in Haikou carrierboard, not Puma DTSI
[8/9] arm64: dts: rockchip: enable I2C3 in Haikou carrierboard, not Ringneck DTSI
[9/9] arm64: dts: rockchip: disable I2C2 bus by default on RK3588 Tiger

Best regards,
-- 
Heiko Stuebner <heiko at sntech.de>