[PATCH v2 4/4] usb: mtu3: add support remote wakeup of mt8196

[Chunfeng Yun (云春峰)]

On Tue, 2025-02-18 at 10:26 +0100, AngeloGioacchino Del Regno wrote:
> External email : Please do not click links or open attachments until
> you have verified the sender or the content.
> 
> 
> Il 09/02/25 04:31, Chunfeng Yun (云春峰) ha scritto:
> > On Wed, 2025-01-22 at 10:30 +0100, AngeloGioacchino Del Regno
> > wrote:
> > > External email : Please do not click links or open attachments
> > > until
> > > you have verified the sender or the content.
> > > 
> > > 
> > > Il 21/01/25 15:50, Chunfeng Yun ha scritto:
> > > > There are three USB controllers on mt8196, each controller's
> > > > wakeup
> > > > control is different, add some specific versions for them.
> > > > Here add only for dual-role controllers.
> > > > 
> > > > Signed-off-by: Chunfeng Yun <chunfeng.yun at mediatek.com>
> > > 
> > >   From the datasheets, I can read the following:
> > > 
> > > IP0: host -> 0x1670_0000  device(mtu3) -> 0x1670_1000
> > > IP1: host -> 0x1671_0000  device(mtu3) -> 0x1671_1000
> > > IP2: host -> 0x1672_0000  device(mtu3) -> 0x1672_1000
> > > 
> > 
> > I'll check it.
> > 
> > > ...this means that you're missing the IP2 here, which you did not
> > > miss in the
> > > commit adding the wakeup control in mtk-xhci instead.
> > > 
> > > So, since I see that all of the USB IPs are behind MTU3, and that
> > > there is no
> > > USB IP that does *not* support gadget mode (so, there's no USB IP
> > > that does NOT
> > > support MTU3), you shall add all three here, and you shall drop
> > > the
> > > commit that
> > > adds the wakeup control in mtk-xhci entirely.
> > 
> > No, I'll still add them in mtk-xhci driver as before for the cases
> > that
> > only use xhci only, no need use mtu3 driver.
> > 
> > As I said before, event the controller supports dual-role mode,
> > which
> > don't mean that it can use this upstream mtu3 driver, some SoC have
> > limitation and can't support the dual-role mode switch used in
> > upstream
> > driver. but all SoC can use upstream xhci-mtk driver. that why I
> > add
> > some SoC's wakeup control in xhci-mtk, but not in mtu3 driver.
> > 
> > > 
> > > This is because there will be no DT node declaring only XHCI.
> > > 
> > > Since after the proposed change all controllers will be MTU3 ->
> > > XHCI,
> > > there's
> > > no need to add the same in the mtk-xhci driver.
> > 
> > I think it's better to leave the selection to the customer, for
> > example, on chromebook, we only use xhci driver and do not enable
> > mtu3.
> > 
> 
> Chromebooks can use MTU3 and lock it in HOST mode only.
> 
> The MTU3 hardware is there - don't hide it.
I don't want to hide it, the dts binding support two ways to use xhci-
mtk driver. And we can't force customers to use the module he don't
need it, right? that will be easier to encounter more problems.

On more MediaTek SoCs, we support dual-role controller and host only
controller at the same, then we will add the wakeup function on both
mtu3 and xhci-mtk drivers. So for the SoCs that only supports dual-role 
controller, we also want to add them as the same way. This can be
treated as a common practice.


Thanks

> 
> Regards,
> Angelo
> 
> > Thanks
> > 
> > > 
> > > Cheers,
> > > Angelo
> > > 
> > > > ---
> > > > v2: add wakeup for dual-role controllers
> > > > ---
> > > >    drivers/usb/mtu3/mtu3_host.c | 17 +++++++++++++++++
> > > >    1 file changed, 17 insertions(+)
> > > > 
> > > > diff --git a/drivers/usb/mtu3/mtu3_host.c
> > > > b/drivers/usb/mtu3/mtu3_host.c
> > > > index 7c657ea2dabd..d65b0f318436 100644
> > > > --- a/drivers/usb/mtu3/mtu3_host.c
> > > > +++ b/drivers/usb/mtu3/mtu3_host.c
> > > > @@ -46,6 +46,11 @@
> > > >    #define WC1_IS_P_95         BIT(12)
> > > >    #define WC1_IS_EN_P0_95             BIT(6)
> > > > 
> > > > +/* mt8196 */
> > > > +#define PERI_WK_CTRL0_8196   0x08
> > > > +#define WC0_IS_EN_P0_96              BIT(0)
> > > > +#define WC0_IS_EN_P1_96              BIT(7)
> > > > +
> > > >    /* mt2712 etc */
> > > >    #define PERI_SSUSB_SPM_CTRL 0x0
> > > >    #define SSC_IP_SLEEP_EN     BIT(4)
> > > > @@ -59,6 +64,8 @@ enum ssusb_uwk_vers {
> > > >        SSUSB_UWK_V1_3,         /* mt8195 IP0 */
> > > >        SSUSB_UWK_V1_5 = 105,   /* mt8195 IP2 */
> > > >        SSUSB_UWK_V1_6,         /* mt8195 IP3 */
> > > > +     SSUSB_UWK_V1_7,         /* mt8196 IP0 */
> > > > +     SSUSB_UWK_V1_8,         /* mt8196 IP1 */
> > > >    };
> > > > 
> > > >    /*
> > > > @@ -100,6 +107,16 @@ static void
> > > > ssusb_wakeup_ip_sleep_set(struct
> > > > ssusb_mtk *ssusb, bool enable)
> > > >                msk = WC0_IS_EN_P3_95 | WC0_IS_C_95(0x7) |
> > > > WC0_IS_P_95;
> > > >                val = enable ? (WC0_IS_EN_P3_95 |
> > > > WC0_IS_C_95(0x1)) :
> > > > 0;
> > > >                break;
> > > > +     case SSUSB_UWK_V1_7:
> > > > +             reg = ssusb->uwk_reg_base + PERI_WK_CTRL0_8196;
> > > > +             msk = WC0_IS_EN_P0_96;
> > > > +             val = enable ? msk : 0;
> > > > +             break;
> > > > +     case SSUSB_UWK_V1_8:
> > > > +             reg = ssusb->uwk_reg_base + PERI_WK_CTRL0_8196;
> > > > +             msk = WC0_IS_EN_P1_96;
> > > > +             val = enable ? msk : 0;
> > > > +             break;
> > > >        case SSUSB_UWK_V2:
> > > >                reg = ssusb->uwk_reg_base + PERI_SSUSB_SPM_CTRL;
> > > >                msk = SSC_IP_SLEEP_EN | SSC_SPM_INT_EN;
> > > 
> > > 
> > > 
> 
>