[PATCH v2 1/4] dt-bindings: reset: Add Armada8K reset controller

[Krzysztof Kozlowski]

On Thu, Feb 20, 2025 at 03:25:24PM -0800, Wilson Ding wrote:
> Add device-tree binding documentation for the Armada8K reset driver.
> 
> Signed-off-by: Wilson Ding <dingwei at marvell.com>
> ---
>  .../reset/marvell,armada8k-reset.yaml         | 45 +++++++++++++++++++
>  1 file changed, 45 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/reset/marvell,armada8k-reset.yaml
> 
> diff --git a/Documentation/devicetree/bindings/reset/marvell,armada8k-reset.yaml b/Documentation/devicetree/bindings/reset/marvell,armada8k-reset.yaml
> new file mode 100644
> index 000000000000..b9f7f3c24d3c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/reset/marvell,armada8k-reset.yaml
> @@ -0,0 +1,45 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +# Copyright 2025 Wilson Ding <dingwei at marvell.com>
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/reset/marvell,armada8k-reset.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Marvell Armada8K reset controller
> +
> +maintainers:
> +  - Wilson Ding <dingwei at marvell.com>
> +
> +description: The reset controller node must be a sub-node of the system
> +  controller node on Armada7K/8K or CN913x SoCs.
> +
> +properties:
> +  compatible:
> +    const: marvell,armada8k-reset
> +
> +  offset:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    description: Offset in the register map for the gpio registers (in bytes)

That's neither correct nor needed. Your device knows ofsset based on the
compatible.

Best regards,
Krzysztof