[PATCH] arm: clk: Add ETH switch clock description for vf610 SoC

Lukasz Majewski lukma at denx.de
Thu Feb 20 08:05:11 PST 2025


Hi Andrew,

> > > Seems like a reasonable compromise. You would only load this
> > > driver if you intend to make use of the switch...  
> > 
> > Yes, the main use case would be the switch (after bridge ... command
> > called).
> > 
> > However, until then we shall? have port separation.  
> 
> Yes. The model Linux uses is that the ports are individual interfaces
> to start with. We should keep to that model.

+1

> 
> > > MoreThanIP is now part of Synopsys. I wounder if this IP now
> > > exists in other SoCs? The press release however suggests Synopsys
> > > was interesting in the high speed interfaces, not a two ports Fast
> > > Ethernet switch.  
> > 
> > I would need some detailed documentation....  
> 
> Which is probably not available. You might be able to get some clues
> from the Freescale datasheets, if they have kept the address spaces
> separated. I don't see it as a strong requirement, given how old this
> IP is, and the limited interest in supporting it over the years, My
> guess is, nobody else uses it.

:-)

> 
> 	Andrew




Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH,      Managing Director: Erika Unter
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20250220/b3556e50/attachment.sig>


More information about the linux-arm-kernel mailing list