[PATCH iwl-next v5 0/9] igc: Add support for Frame Preemption feature in IGC

[Vladimir Oltean]

On Wed, Feb 19, 2025 at 09:53:40PM -0500, Faizal Rahim wrote:
> Introduces support for the FPE feature in the IGC driver.
> 
> The patches aligns with the upstream FPE API:
> https://patchwork.kernel.org/project/netdevbpf/cover/20230220122343.1156614-1-vladimir.oltean@nxp.com/
> https://patchwork.kernel.org/project/netdevbpf/cover/20230119122705.73054-1-vladimir.oltean@nxp.com/
> 
> It builds upon earlier work:
> https://patchwork.kernel.org/project/netdevbpf/cover/20220520011538.1098888-1-vinicius.gomes@intel.com/
> 
> The patch series adds the following functionalities to the IGC driver:
> a) Configure FPE using `ethtool --set-mm`.
> b) Display FPE settings via `ethtool --show-mm`.
> c) View FPE statistics using `ethtool --include-statistics --show-mm'.
> e) Block setting preemptible tc in taprio since it is not supported yet.
>    Existing code already blocks it in mqprio.

Thanks for the work, the patch set looks ok to me apart from the minor things I highlighted.
It would be good to know that you've tested:
- a netdev down/up cycle
- a suspend/resume cycle
- with CONFIG_PROVE_LOCKING, CONFIG_DEBUG_ATOMIC_SLEEP, CONFIG_DMA_API_DEBUG,
  CONFIG_KASAN all enabled
- the kselftest again
just so we have more confidence we are not missing some non-obvious issues.

@Furong, the set looks close to final state to me, would you mind
leaving a Tested-by: tag on patch 1/9?