[PATCH] perf/arm-cmn: don't claim resource during ioremap() for CMN700 with ACPI
Robin Murphy
robin.murphy at arm.com
Tue Feb 18 04:31:10 PST 2025
On 2025-02-18 10:58 am, YinFengwei wrote:
> On Tue, Feb 18, 2025 at 10:31:42AM +0800, Robin Murphy wrote:
>> On 2025-02-18 1:21 am, Yin Fengwei wrote:
>>> Currently, arm-cmn PMU driver assumes ACPI claim resource
>>> for CMN600 + ACPI. But with CMN700 + ACPI, the device probe
>>> failed because of resource claim failes when ioremap() is
>>> called:
>>> [ 10.837300] arm-cmn ARMHC700:00: error -EBUSY: can't request region for resource [mem 0x40000000-0x4fffffff]
>>> [ 10.847310] arm-cmn ARMHC700:00: probe with driver arm-cmn failed with error -16
>>> [ 10.854726] arm-cmn ARMHC700:02: error -EBUSY: can't request region for resource [mem 0x40040000000-0x4004fffffff]
>>> [ 10.865085] arm-cmn ARMHC700:02: probe with driver arm-cmn failed with error -16
>>>
>>> Let CMN700 + ACPI do same as CMN600 + ACPI to allow CMN700
>>> work in ACPI env.
>>
>> No, the CMN-600 routine is a special case for CMN-600 having two nested
>> memory resources of its own. CMN-700 and everything else only have one
>> memory resource, so that is not appropriate. What else is claiming the
>> region to cause a conflict?
> Sorry. Forgot the link for the new proposed fix:
> https://lore.kernel.org/all/Z7QYlUP6nfBNMXsv@U-V2QX163P-2032.local/
Yes, I saw that. It's a broken diff that won't even compile, with no
explanation of what it's supposed to be trying to achieve or why. I'm
not sure what you're asking me to comment on.
> My understanding is that there are two problems here:
> 1. ACPI claim the memory range and that's why we see this -EBUSY error
> with correct code path for CMN700 + ACPI table.
No, it's fine to claim the exact *same* range that the ACPI companion
owns; the identical requests just nest inside each other. I don't have a
CMN-700 to hand but here's a selection of other drivers doing just that
from /proc/iomem on my system:
12600000-12600fff : ARMH0011:00
12600000-12600fff : ARMH0011:00 ARMH0011:00
12610000-12610fff : ARMH0011:01
12610000-12610fff : ARMH0011:01 ARMH0011:01
126b0000-126b0fff : APMC0D0F:00
126b0000-126b0fff : APMC0D0F:00 APMC0D0F:00
126f0000-126f0fff : APMC0D81:00
126f0000-126f0fff : APMC0D81:00 APMC0D81:00
And I know people are using the CMN-700 PMU on other ACPI systems
without issue, so there's nothing wrong with the binding or the driver
in general.
The resource conflict only arises when a request overlaps an existing
region inexactly. Either your firmware is describing the CMN
incorrectly, or some other driver is claiming conflicting iomem regions
for some reason.
Thanks,
Robin.
> 2. It's not correct to apply CMN600 probe method to CMN700 because
> CMN600 has two nested memory resouces while CMN700 should only have
> one memory resource. And you don't want to introduce trick to handle
> incorect ACPI DSDT.
>
> Regards
> Yin, Fengwei
>
>>
>> Thanks,
>> Robin.
More information about the linux-arm-kernel
mailing list