[PATCH v2 6/8] PCI: brcmstb: Use same constant table for config space access
Jim Quinlan
james.quinlan at broadcom.com
Fri Feb 14 09:39:34 PST 2025
The constants EXT_CFG_DATA and EXT_CFG_INDEX vary by SOC. One of the
map_bus methods used these constants, the other used different constants.
Fortunately there was no problem because the SoCs that used the latter
map_bus method all had the same register constants.
Remove the redundant constants and adjust the code to use them. In
addition, update EXT_CFG_DATA to use the 4k-page based config space access
system, which is what the second map_bus method was already using.
Signed-off-by: Jim Quinlan <james.quinlan at broadcom.com>
---
drivers/pci/controller/pcie-brcmstb.c | 14 ++++++--------
1 file changed, 6 insertions(+), 8 deletions(-)
diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c
index e1059e3365bd..923ac1a03f85 100644
--- a/drivers/pci/controller/pcie-brcmstb.c
+++ b/drivers/pci/controller/pcie-brcmstb.c
@@ -150,9 +150,6 @@
#define MSI_INT_MASK_SET 0x10
#define MSI_INT_MASK_CLR 0x14
-#define PCIE_EXT_CFG_DATA 0x8000
-#define PCIE_EXT_CFG_INDEX 0x9000
-
#define PCIE_RGR1_SW_INIT_1_PERST_MASK 0x1
#define PCIE_RGR1_SW_INIT_1_PERST_SHIFT 0x0
@@ -727,8 +724,8 @@ static void __iomem *brcm_pcie_map_bus(struct pci_bus *bus,
/* For devices, write to the config space index register */
idx = PCIE_ECAM_OFFSET(bus->number, devfn, 0);
- writel(idx, pcie->base + PCIE_EXT_CFG_INDEX);
- return base + PCIE_EXT_CFG_DATA + PCIE_ECAM_REG(where);
+ writel(idx, base + IDX_ADDR(pcie));
+ return base + DATA_ADDR(pcie) + PCIE_ECAM_REG(where);
}
static void __iomem *brcm7425_pcie_map_bus(struct pci_bus *bus,
@@ -1711,7 +1708,7 @@ static void brcm_pcie_remove(struct platform_device *pdev)
static const int pcie_offsets[] = {
[RGR1_SW_INIT_1] = 0x9210,
[EXT_CFG_INDEX] = 0x9000,
- [EXT_CFG_DATA] = 0x9004,
+ [EXT_CFG_DATA] = 0x8000,
[PCIE_HARD_DEBUG] = 0x4204,
[PCIE_INTR2_CPU_BASE] = 0x4300,
};
@@ -1719,7 +1716,7 @@ static const int pcie_offsets[] = {
static const int pcie_offsets_bcm7278[] = {
[RGR1_SW_INIT_1] = 0xc010,
[EXT_CFG_INDEX] = 0x9000,
- [EXT_CFG_DATA] = 0x9004,
+ [EXT_CFG_DATA] = 0x8000,
[PCIE_HARD_DEBUG] = 0x4204,
[PCIE_INTR2_CPU_BASE] = 0x4300,
};
@@ -1733,8 +1730,9 @@ static const int pcie_offsets_bcm7425[] = {
};
static const int pcie_offsets_bcm7712[] = {
+ [RGR1_SW_INIT_1] = 0x9210,
[EXT_CFG_INDEX] = 0x9000,
- [EXT_CFG_DATA] = 0x9004,
+ [EXT_CFG_DATA] = 0x8000,
[PCIE_HARD_DEBUG] = 0x4304,
[PCIE_INTR2_CPU_BASE] = 0x4400,
};
--
2.43.0
More information about the linux-arm-kernel
mailing list