[PATCH v3 00/10] drivers/perf: apple_m1: Add Apple A7-A11, T2 SoC support

[Nick Chan]

This series adds support for the CPU PMU in the older Apple A7-A11, T2
SoCs. These PMUs may have a different event layout, less counters, or
deliver their interrupts via IRQ instead of a FIQ. Since some of those
older SoCs support 32-bit EL0, counting for 32-bit EL0 also need to
be enabled by the driver where applicable.

Patch 1 adds the DT bindings.
Patch 2-5 prepares the driver to allow adding support for those 
older SoCs.
Patch 6-10 adds support for the older SoCs.

Signed-off-by: Nick Chan <towinchenmi at gmail.com>
---
Changes in v3:
- Configure PMC8 and PMC9 for 32-bit EL0
- Remove redundant _common suffix from shared functions
- Link to v2: https://lore.kernel.org/r/20250213-apple-cpmu-v2-0-87b361932e88@gmail.com

Changes in v2:
- Remove unused flags parameter from apple_pmu_init_common()
- Link to v1: https://lore.kernel.org/r/20250212-apple-cpmu-v1-0-f8c7f2ac1743@gmail.com

---
Nick Chan (10):
      dt-bindings: arm: pmu: Add Apple A7-A11 SoC CPU PMU compatibles
      drivers/perf: apple_m1: Support per-implementation event tables
      drivers/perf: apple_m1: Support a per-implementation number of counters
      drivers/perf: apple_m1: Support configuring counters for 32-bit EL0
      drivers/perf: apple_m1: Support per-implementation PMU start
      drivers/perf: apple_m1: Add Apple A7 support
      drivers/perf: apple_m1: Add Apple A8/A8X support
      drivers/perf: apple_m1: Add A9/A9X support
      drivers/perf: apple_m1: Add Apple A10/A10X/T2 Support
      drivers/perf: apple_m1: Add Apple A11 Support

 Documentation/devicetree/bindings/arm/pmu.yaml |   6 +
 arch/arm64/include/asm/apple_m1_pmu.h          |   3 +
 drivers/perf/apple_m1_cpu_pmu.c                | 779 ++++++++++++++++++++++++-
 3 files changed, 756 insertions(+), 32 deletions(-)
---
base-commit: 2014c95afecee3e76ca4a56956a936e23283f05b
change-id: 20250211-apple-cpmu-5a5a3da39483

Best regards,
-- 
Nick Chan <towinchenmi at gmail.com>