[PATCH v6 1/2] dt-bindings: net: Add FSD EQoS device tree bindings

[Swathi K S]

> -----Original Message-----
> From: Krzysztof Kozlowski <krzk at kernel.org>
> Sent: 13 February 2025 13:24
> To: Swathi K S <swathi.ks at samsung.com>
> Cc: krzk+dt at kernel.org; andrew+netdev at lunn.ch; davem at davemloft.net;
> edumazet at google.com; kuba at kernel.org; pabeni at redhat.com;
> robh at kernel.org; conor+dt at kernel.org; richardcochran at gmail.com;
> mcoquelin.stm32 at gmail.com; alexandre.torgue at foss.st.com;
> rmk+kernel at armlinux.org.uk; netdev at vger.kernel.org;
> devicetree at vger.kernel.org; linux-stm32 at st-md-mailman.stormreply.com;
> linux-arm-kernel at lists.infradead.org; linux-kernel at vger.kernel.org
> Subject: Re: [PATCH v6 1/2] dt-bindings: net: Add FSD EQoS device tree
> bindings
> 
> On Thu, Feb 13, 2025 at 10:16:23AM +0530, Swathi K S wrote:
> > +  clock-names:
> > +    minItems: 5
> > +    maxItems: 10
> > +    contains:
> > +      enum:
> > +        - ptp_ref
> > +        - master_bus
> > +        - slave_bus
> > +        - tx
> > +        - rx
> > +        - master2_bus
> > +        - slave2_bus
> > +        - eqos_rxclk_mux
> > +        - eqos_phyrxclk
> > +        - dout_peric_rgmii_clk
> 
> This does not match the previous entry. It should be strictly ordered with
> minItems: 5.

Hi Krzysztof,
Thanks for reviewing.
In FSD SoC, we have 2 instances of ethernet in two blocks.
One instance needs 5 clocks and the other needs 10 clocks.

I tried to understand this by looking at some other dt-binding files as given below, but looks like they follow similar approach
Documentation/devicetree/bindings/net/stm32-dwmac.yaml
Documentation/devicetree/bindings/net/rockchip-dwmac.yaml

Could you please guide me on how to implement this?
Also, please help me understand what is meant by 'strictly ordered'

> 
> 
> > +
> > +  iommus:
> > +    maxItems: 1
> > +
> > +  phy-mode:
> > +    enum:
> > +      - rgmii-id
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - interrupts
> > +  - clocks
> > +  - clock-names
> > +  - iommus
> > +  - phy-mode
> > +
> > +unevaluatedProperties: false
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/clock/fsd-clk.h>
> > +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> > +    soc {
> > +        #address-cells = <2>;
> > +        #size-cells = <2>;
> > +        ethernet1: ethernet at 14300000 {
> > +            compatible = "tesla,fsd-ethqos";
> > +            reg = <0x0 0x14300000 0x0 0x10000>;
> > +            interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
> > +            interrupt-names = "macirq";
> > +            clocks = <&clock_peric
> PERIC_EQOS_TOP_IPCLKPORT_CLK_PTP_REF_I>,
> > +                     <&clock_peric PERIC_EQOS_TOP_IPCLKPORT_ACLK_I>,
> > +                     <&clock_peric PERIC_EQOS_TOP_IPCLKPORT_HCLK_I>,
> > +                     <&clock_peric PERIC_EQOS_TOP_IPCLKPORT_RGMII_CLK_I>,
> > +                     <&clock_peric PERIC_EQOS_TOP_IPCLKPORT_CLK_RX_I>,
> > +                     <&clock_peric PERIC_BUS_D_PERIC_IPCLKPORT_EQOSCLK>,
> > +                     <&clock_peric PERIC_BUS_P_PERIC_IPCLKPORT_EQOSCLK>,
> > +                     <&clock_peric PERIC_EQOS_PHYRXCLK_MUX>,
> > +                     <&clock_peric PERIC_EQOS_PHYRXCLK>,
> > +                     <&clock_peric PERIC_DOUT_RGMII_CLK>;
> > +            clock-names = "ptp_ref", "master_bus", "slave_bus","tx",
> > +                          "rx", "master2_bus", "slave2_bus", "eqos_rxclk_mux",
> > +                          "eqos_phyrxclk","dout_peric_rgmii_clk";
> > +            pinctrl-names = "default";
> > +            pinctrl-0 = <&eth1_tx_clk>, <&eth1_tx_data>, <&eth1_tx_ctrl>,
> > +                        <&eth1_phy_intr>, <&eth1_rx_clk>, <&eth1_rx_data>,
> > +                        <&eth1_rx_ctrl>, <&eth1_mdio>;
> > +            iommus = <&smmu_peric 0x0 0x1>;
> > +            phy-mode = "rgmii-id";
> > +       };
> 
> Misaligned/misindented.

Ack

> 
> Best regards,
> Krzysztof