[PATCH v2 2/3] arm64: dts: rockchip: Enable the NPU on FriendlyElec CM3588

[Ricardo Pardini via B4 Relay]

From: Ricardo Pardini <ricardo at pardini.net>

Enable the NPU on FriendlyElec CM3588.
The regulator vdd_npu_s0 was already in place; since
the NPU power domain supply is now described, remove the
regulator's always-on.

Signed-off-by: Ricardo Pardini <ricardo at pardini.net>
---
 .../dts/rockchip/rk3588-friendlyelec-cm3588.dtsi   | 35 +++++++++++++++++++++-
 1 file changed, 34 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3588-friendlyelec-cm3588.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-friendlyelec-cm3588.dtsi
index af431fdcbea7a..49cf4b85c4e96 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-friendlyelec-cm3588.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588-friendlyelec-cm3588.dtsi
@@ -182,7 +182,6 @@ vdd_npu_s0: regulator at 42 {
 		reg = <0x42>;
 		fcs,suspend-voltage-selector = <1>;
 		regulator-name = "vdd_npu_s0";
-		regulator-always-on;
 		regulator-boot-on;
 		regulator-min-microvolt = <550000>;
 		regulator-max-microvolt = <950000>;
@@ -264,6 +263,10 @@ &pd_gpu {
 	domain-supply = <&vdd_gpu_s0>;
 };
 
+&pd_npu {
+	domain-supply = <&vdd_npu_s0>;
+};
+
 &pinctrl {
 	gpio-leds {
 		led_sys_pin: led-sys-pin {
@@ -294,6 +297,36 @@ sd_s0_pwr: sd-s0-pwr {
 	};
 };
 
+&rknn_core_0 {
+	npu-supply = <&vdd_npu_s0>;
+	sram-supply = <&vdd_npu_s0>;
+	status = "okay";
+};
+
+&rknn_core_1 {
+	npu-supply = <&vdd_npu_s0>;
+	sram-supply = <&vdd_npu_s0>;
+	status = "okay";
+};
+
+&rknn_core_2 {
+	npu-supply = <&vdd_npu_s0>;
+	sram-supply = <&vdd_npu_s0>;
+	status = "okay";
+};
+
+&rknn_mmu_0 {
+	status = "okay";
+};
+
+&rknn_mmu_1 {
+	status = "okay";
+};
+
+&rknn_mmu_2 {
+	status = "okay";
+};
+
 &saradc {
 	vref-supply = <&avcc_1v8_s0>;
 	status = "okay";

-- 
2.52.0