[PATCH v2 2/8] arm: dts: mstar: breadbee: Correct regulator names

[Daniel Palmer]

The regulator names had a "@<n>" in them so the dt validation
stuff wanted a reg property. Fix the names to match what the regulator
is for and remove the "@<n>" bit.

Signed-off-by: Daniel Palmer <daniel at 0x0f.com>
---
 .../boot/dts/sigmastar/mstar-infinity-breadbee-common.dtsi  | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/sigmastar/mstar-infinity-breadbee-common.dtsi b/arch/arm/boot/dts/sigmastar/mstar-infinity-breadbee-common.dtsi
index 507ff2fba837..99f5a5603dc7 100644
--- a/arch/arm/boot/dts/sigmastar/mstar-infinity-breadbee-common.dtsi
+++ b/arch/arm/boot/dts/sigmastar/mstar-infinity-breadbee-common.dtsi
@@ -7,7 +7,7 @@
 #include <dt-bindings/gpio/gpio.h>
 
 / {
-	vcc_core: fixedregulator at 0 {
+	vcc_core: regulator-core {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc_core";
 		regulator-min-microvolt = <1000000>;
@@ -15,7 +15,7 @@ vcc_core: fixedregulator at 0 {
 		regulator-boot-on;
 	};
 
-	vcc_dram: fixedregulator at 1 {
+	vcc_dram: regulator-dram {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc_dram";
 		regulator-min-microvolt = <1800000>;
@@ -23,7 +23,7 @@ vcc_dram: fixedregulator at 1 {
 		regulator-boot-on;
 	};
 
-	vcc_io: fixedregulator at 2 {
+	vcc_io: regulator-io {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc_io";
 		regulator-min-microvolt = <3300000>;
-- 
2.51.0