[PATCH 0/4] Properly support FriendlyElec HD702E

[Robin Murphy]

Hi all,

I've been using the HD702E LCD/touchscreen on my NanoPC-T4 for a few
years using my own DT with the "simple-panel" binding, but now we have
upstream overlays I figured it's about time to try doing it properly.
The screen itself doesn't seem to want to work as a generic "edp-panel",
as it appears the EDID isn't readable until after the whole lot is
enabled - I'm guessing this might be to do with the Analogix driver's
force-hpd behaviour - but since we do already have the legacy data, it
doesn't seem unreasonable to keep using it.

Thanks,
Robin.


Robin Murphy (4):
  dt-bindings: display: panel: Move FriendlyElec HD702E to eDP
  drm/panel-edp: Move FriendlyELEC HD702E
  arm64: dts: rockchip: Move RK3399 eDP pinctrl to boards
  arm64: dts: rockchip: Add overlay for FriendlyElec HD702E

 .../display/panel/panel-edp-legacy.yaml       |  2 +
 .../bindings/display/panel/panel-simple.yaml  |  2 -
 arch/arm64/boot/dts/rockchip/Makefile         |  5 ++
 arch/arm64/boot/dts/rockchip/rk3399-base.dtsi |  2 -
 .../dts/rockchip/rk3399-gru-chromebook.dtsi   |  2 +
 .../dts/rockchip/rk3399-nanopc-t4-hd702e.dtso | 62 +++++++++++++++++++
 .../boot/dts/rockchip/rk3399-pinebook-pro.dts |  2 -
 .../rockchip/rk3399-sapphire-excavator.dts    |  2 +
 drivers/gpu/drm/panel/panel-edp.c             | 26 ++++++++
 drivers/gpu/drm/panel/panel-simple.c          | 25 --------
 10 files changed, 99 insertions(+), 31 deletions(-)
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4-hd702e.dtso

-- 
2.34.1