[PATCH v2] arm64: dts: imx93-9x9-qsb: add CAN support overlay file

[Shawn Guo]

On Tue, Dec 02, 2025 at 02:04:33PM +0800, Haibo Chen wrote:
> CAN1 and Micfil share pins on imx93-9x9-qsb board, use TMUX1574RSVR
> to control the connection: put sel to high, select CAN1, put sel to
> low, select Micfil. In default, sel keep low.
> 
> To support CAN1, need to put the sel to high. Besides, CAN1 use phy
> TJA1057GT/3.
> 
> ---
> Signed-off-by: Haibo Chen <haibo.chen at nxp.com>

This line should be above "---".  Otherwise, it gets lost.

Fixed it up and applied the patch.

Shawn

> ---
> Changes in v2:
> - change commit title
> - Keep order by alphabet in Makefile
> - Link to v1: https://lore.kernel.org/r/20251126-b4-9391-can-dts-v1-1-c23145f0d2db@nxp.com
> ---
>  arch/arm64/boot/dts/freescale/Makefile             |  2 +
>  .../boot/dts/freescale/imx93-9x9-qsb-can1.dtso     | 63 ++++++++++++++++++++++
>  2 files changed, 65 insertions(+)