[PATCH 1/1] arm64: dts: imx8mp-skov: add pinctrl-name 'reset' to fix CHECK_DTB warning

[Frank Li]

Add pinctrl-name 'reset' to fix below CHECK_DTB warnings:
  arch/arm64/boot/dts/freescale/imx8mp-skov-basic.dtb: switch at 5f (microchip,ksz9893): pinctrl-names: ['default'] is too short
	from schema $id: http://devicetree.org/schemas/net/dsa/microchip,ksz.yaml#

The commit (e469b87e0fb0d dt-bindings: net: dsa: microchip: Add strap
description to set SPI mode" force use two pinctrl-name 'default' and
'reset'. switch at 5f doesn't use SPI, so it is safe to use the same pinctrl
setting for both.

Signed-off-by: Frank Li <Frank.Li at nxp.com>
---
 arch/arm64/boot/dts/freescale/imx8mp-skov-reva.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-skov-reva.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-skov-reva.dtsi
index 020f20c8ce667..7d2fc5fdd3bd1 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-skov-reva.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-skov-reva.dtsi
@@ -373,8 +373,8 @@ &i2c4 {
 
 	switch: switch at 5f {
 		compatible = "microchip,ksz9893";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_switch>;
+		pinctrl-names = "default", "reset";
+		pinctrl-0 = <&pinctrl_switch>, <&pinctrl_switch>;
 		reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
 		reg = <0x5f>;
 
-- 
2.34.1