[PATCH v4 7/7] ARM: dts: rockchip: rk3506: Add pinctrl and rmio dtsi for rk3506

[Krzysztof Kozlowski]

On 29/12/2025 08:25, 张烨 wrote:
> 在 2025/12/28 18:37, Krzysztof Kozlowski 写道:
> > On 27/12/2025 12:49, Ye Zhang wrote:
> >> +		/omit-if-no-ref/
> >> +		rm_io28_touch_key_in6: rm-io28-touch-key-in6 {
> >> +			rockchip,pins =
> >> +				<1 RK_PC3 7 &pcfg_pull_none>;
> >> +			rockchip,rmio-pins =
> >> +				<0 28 49>;
> >> +		};
> >> +
> >> +		/omit-if-no-ref/
> >> +		rm_io28_touch_key_in7: rm-io28-touch-key-in7 {
> >> +			rockchip,pins =
> >> +				<1 RK_PC3 7 &pcfg_pull_none>;
> >> +			rockchip,rmio-pins =
> >> +				<0 28 50>;
> >> +		};
> >> +
> >> +		/omit-if-no-ref/
> >> +		rm_io28_sai0_mclk: rm-io28-sai0-mclk {
> >> +			rockchip,pins =
> >> +				<1 RK_PC3 7 &pcfg_pull_none>;
> >> +			rockchip,rmio-pins =
> >> +				<0 28 51>;
> >> +		};
> >> +
> >> +		/omit-if-no-ref/
> >> +		rm_io28_sai0_sclk: rm-io28-sai0-sclk {
> >> +			rockchip,pins =
> >> +				<1 RK_PC3 7 &pcfg_pull_none>;
> >> +			rockchip,rmio-pins =
> >> +				<0 28 52>;
> >> +		};
> >> +
> >> +		/omit-if-no-ref/
> >> +		rm_io28_sai0_lrck: rm-io28-sai0-lrck {
> >> +			rockchip,pins =
> >> +				<1 RK_PC3 7 &pcfg_pull_none>;
> >> +			rockchip,rmio-pins =
> >> +				<0 28 53>;
> >> +		};
> >> +
> >> +		/omit-if-no-ref/
> >> +		rm_io28_sai0_sdi0: rm-io28-sai0-sdi0 {
> >> +			rockchip,pins =
> >> +				<1 RK_PC3 7 &pcfg_pull_none>;
> >> +			rockchip,rmio-pins =
> >> +				<0 28 54>;
> >> +		};
> >
> > Why are you defining all pins? This is wrong, your driver has to do it,
> > not DTS. All these definitions when not used are just pointless.
> >

Don't send HTML to us. I cannot parse above.

Best regards,
Krzysztof