[PATCH] arm64: dts: imx8mp: Update Data Modul i.MX8M Plus eDM SBC DT to rev.903

[Shawn Guo]

On Fri, Dec 26, 2025 at 11:24:29AM +0100, Marek Vasut wrote:
> On 12/27/24 4:18 PM, Rob Herring (Arm) wrote:
> 
> Hello Shawn,
> 
> > On Thu, 26 Dec 2024 18:13:27 +0100, Marek Vasut wrote:
> > > Update the DT to match newest Data Modul i.MX8M Plus eDM SBC rev.903
> > > board which implements significant changes. Keep some of the rev.900
> > > and rev.902 nodes in the DT so that a DTO can be used to support old
> > > rev.900 and rev.902 boards easily.
> 
> [...]
> 
> > arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dtb: tpm at 2e: compatible: 'oneOf' conditional failed, one must be fixed:
> > 	['st,st33tphf2ei2c', 'tcg,tpm-tis-i2c'] is too long
> > 	'st,st33tphf2ei2c' is not one of ['infineon,slb9673', 'nuvoton,npct75x', 'st,st33ktpm2xi2c']
> 
> This is addressed in bindings patch [1] . Can this patch and the bindings
> patch be applied ?
> 
> https://lore.kernel.org/all/20241226171124.83735-1-marex@denx.de/

Could you resend them?

Shawn