[PATCH 1/2] arm64: dts: tqma8mpql-mba8mpxl: Configure multiple queues on eqos
Alexander Stein
alexander.stein at ew.tq-group.com
Mon Dec 22 00:18:08 PST 2025
The MBa8MPxL mainboard has an integrated PHY connected to the EQOS
ethernet controller which can support up to five queues. Configure
these queues in the same manor as done on the imx8mp-evk.
Setting DMA to threas mode is necessary to prevent FIFO overflows, see
commit 0bc3e333a0c82 ("arm64: dts: imx8mp-evk: configure multiple queues
on eqos")
Signed-off-by: Alexander Stein <alexander.stein at ew.tq-group.com>
---
.../freescale/imx8mp-tqma8mpql-mba8mpxl.dts | 67 +++++++++++++++++++
1 file changed, 67 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
index 68cecb0987b6b..eb25828f3b26d 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
@@ -360,6 +360,9 @@ &eqos {
pinctrl-0 = <&pinctrl_eqos>, <&pinctrl_eqos_phy>;
phy-mode = "rgmii-id";
phy-handle = <ðphy3>;
+ snps,force_thresh_dma_mode;
+ snps,mtl-tx-config = <&mtl_tx_setup>;
+ snps,mtl-rx-config = <&mtl_rx_setup>;
status = "okay";
mdio {
@@ -404,6 +407,70 @@ led at 2 {
};
};
};
+
+ mtl_tx_setup: tx-queues-config {
+ snps,tx-queues-to-use = <5>;
+
+ queue0 {
+ snps,dcb-algorithm;
+ snps,priority = <0x1>;
+ };
+
+ queue1 {
+ snps,dcb-algorithm;
+ snps,priority = <0x2>;
+ };
+
+ queue2 {
+ snps,dcb-algorithm;
+ snps,priority = <0x4>;
+ };
+
+ queue3 {
+ snps,dcb-algorithm;
+ snps,priority = <0x8>;
+ };
+
+ queue4 {
+ snps,dcb-algorithm;
+ snps,priority = <0xf0>;
+ };
+ };
+
+ mtl_rx_setup: rx-queues-config {
+ snps,rx-queues-to-use = <5>;
+ snps,rx-sched-sp;
+
+ queue0 {
+ snps,dcb-algorithm;
+ snps,priority = <0x1>;
+ snps,map-to-dma-channel = <0>;
+ };
+
+ queue1 {
+ snps,dcb-algorithm;
+ snps,priority = <0x2>;
+ snps,map-to-dma-channel = <1>;
+ };
+
+ queue2 {
+ snps,dcb-algorithm;
+ snps,priority = <0x4>;
+ snps,map-to-dma-channel = <2>;
+ };
+
+ queue3 {
+ snps,dcb-algorithm;
+ snps,priority = <0x8>;
+ snps,map-to-dma-channel = <3>;
+ };
+
+ queue4 {
+ snps,dcb-algorithm;
+ snps,priority = <0xf0>;
+ snps,map-to-dma-channel = <4>;
+ };
+ };
};
&fec {
--
2.43.0
More information about the linux-arm-kernel
mailing list