[PATCH 1/4] spi: dt-bindings: sun6i: Add compatibles for A523's SPI controllers

[Krzysztof Kozlowski]

On Sun, Dec 21, 2025 at 07:05:08PM +0800, Chen-Yu Tsai wrote:
> The A523 has four SPI controllers. One of them supports MIPI DBI mode
> in addition to standard SPI.
> 
> Compared to older generations, this newer controller now has a combined
> counter for the RX FIFO ad buffer levels. In older generations, the
> RX buffer level was a separate bitfield in the FIFO status register.
> 
> In practice this difference is negligible. The buffer is mostly
> invisible to the implementation. If programmed I/O transfers are limited
> to the FIFO size, then the contents of the buffer seem to always be
> flushed over to the FIFO. For DMA, the DRQ trigger levels are only tied
> to the FIFO levels. In all other aspects, the controller is the same as
> the one in the R329.
> 
> Add new compatible strings for the new controllers.
> 
> Signed-off-by: Chen-Yu Tsai <wens at kernel.org>
> ---
>  .../devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml      | 4 ++++
>  1 file changed, 4 insertions(+)

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski at oss.qualcomm.com>

Best regards,
Krzysztof