[PATCH v2 2/2] arm64: dts: cix: Add OrangePi 6 Plus board support
Gary Yang
gary.yang at cixtech.com
Fri Dec 19 05:35:53 PST 2025
OrangePi 6 Plus adopts CIX CD8180/CD8160 SoC,
built-in 12-core 64-bit processor + NPU processor,
integrated graphics processor, equipped with 16GB/32GB/64GB
LPDDR5, and provides two M.2 KEY-M interfaces 2280 for NVMe SSD,
as well as SPI FLASH and TF slots to meet the needs of fast
read/write and high-capacity storage;
Signed-off-by: Gary Yang <gary.yang at cixtech.com>
---
arch/arm64/boot/dts/cix/Makefile | 1 +
arch/arm64/boot/dts/cix/sky1-xcp.dts | 83 ++++++++++++++++++++++++++++
2 files changed, 84 insertions(+)
create mode 100644 arch/arm64/boot/dts/cix/sky1-xcp.dts
diff --git a/arch/arm64/boot/dts/cix/Makefile b/arch/arm64/boot/dts/cix/Makefile
index ed3713982012..8a6c6fdc4ec0 100644
--- a/arch/arm64/boot/dts/cix/Makefile
+++ b/arch/arm64/boot/dts/cix/Makefile
@@ -1,2 +1,3 @@
# SPDX-License-Identifier: GPL-2.0
dtb-$(CONFIG_ARCH_CIX) += sky1-orion-o6.dtb
+dtb-$(CONFIG_ARCH_CIX) += sky1-xcp.dtb
diff --git a/arch/arm64/boot/dts/cix/sky1-xcp.dts b/arch/arm64/boot/dts/cix/sky1-xcp.dts
new file mode 100644
index 000000000000..1fae52dc9bb0
--- /dev/null
+++ b/arch/arm64/boot/dts/cix/sky1-xcp.dts
@@ -0,0 +1,83 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright 2025 Cix Technology Group Co., Ltd.
+ *
+ */
+
+/dts-v1/;
+
+#include "sky1.dtsi"
+#include "sky1-pinfunc.h"
+
+/ {
+ model = "Xunlong,OrangePi 6 Plus";
+ compatible = "xunlong,orangepi-6-plus", "cix,sky1";
+
+ aliases {
+ serial2 = &uart2;
+ };
+
+ chosen {
+ stdout-path = &uart2;
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ linux,cma {
+ compatible = "shared-dma-pool";
+ reusable;
+ size = <0x0 0x28000000>;
+ linux,cma-default;
+ };
+ };
+
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ pinctrl_hog: hog-cfg {
+ pins {
+ pinmux = <CIX_PAD_GPIO144_FUNC_GPIO144>,
+ <CIX_PAD_GPIO145_FUNC_GPIO145>,
+ <CIX_PAD_GPIO146_FUNC_GPIO146>,
+ <CIX_PAD_GPIO147_FUNC_GPIO147>;
+ bias-pull-down;
+ drive-strength = <8>;
+ };
+ };
+};
+
+&iomuxc_s5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog_s5>;
+
+ pinctrl_hog_s5: hog-s5-cfg {
+ pins {
+ pinmux = <CIX_PAD_GPIO014_FUNC_GPIO014>;
+ bias-pull-up;
+ drive-strength = <8>;
+
+ };
+ };
+};
+
+&pcie_x8_rc {
+ status = "okay";
+};
+
+&pcie_x2_rc {
+ status = "okay";
+};
+
+&pcie_x1_1_rc {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
--
2.49.0
More information about the linux-arm-kernel
mailing list