[PATCH v3 00/11] drm/connector: hdmi: limit infoframes per driver capabilities

[Dmitry Baryshkov]

On 19/12/2025 11:54, Maxime Ripard wrote:
> On Sat, Dec 06, 2025 at 01:28:14PM +0200, Dmitry Baryshkov wrote:
>> On Mon, Dec 01, 2025 at 06:01:56PM +0100, Maxime Ripard wrote:
>>> On Fri, Nov 21, 2025 at 07:09:01PM +0200, Dmitry Baryshkov wrote:
>>>>> So it's not really impossible, you just need some hardware and a day's
>>>>> worth of work.
>>>>>
>>>>> There's no reason these should get a pass, it's breaking the spec for no
>>>>> reason.
>>>>>
>>>>>>> For SPD, It's really not clear to me why atomic_check should do that in
>>>>>>> the first place. Your initial concern was about exposing infoframes in
>>>>>>> debugfs that wouldn't be used by the driver.
>>>>>>>
>>>>>>> If the driver doesn't register a debugfs file for SPD, and ignores
>>>>>>> whatever is in the atomic state, what's should we force drivers to do
>>>>>>> that?
>>>>>>
>>>>>> I really don't think that drivers should mess up with debugfs on their
>>>>>> own. Making atomic_check() disable the unsupported InfoFrames makes the
>>>>>> picture perfect: the DRM no longer tries to program them to the
>>>>>> hardware, DebugFS files stay empty, so the whole state becomes
>>>>>> consistent.
>>>>>
>>>>> In the "bridge has no access to infoframes" case, there's really no
>>>>> infoframe. An empty file is "the infoframe can be there but isn't used",
>>>>> not "we don't have access to it and can't report them". Only drivers
>>>>> have those infos.
>>>>>
>>>>> If we do split up write_infoframe into multiple functions though, I
>>>>> guess we could create the debugfs file only if the function pointer is
>>>>> set, which removes drivers' involvement if you don't like that.
>>>>
>>>> I'm fine with not using HDMI connector framework for lt9611uxc.
>>>> Likewise, I think, it's fine to have empty files for the infoframes
>>>> which are not being sent over the wire for any reason (hw not supporting
>>>> it is one of the reasons).
>>>
>>> I can't think of any other example in the kernel where an empty file
>>> means that the driver doesn't support something.
>>
>> Okay. So we need to sort out implementing the split write_infoframes in
>> drm_bridge_connector. Any suggestions there? I'm asking, because I don't
>> want to end up exploding it.
> 
> I guess it's only really a problem if we want to make it const, but we
> don't have to? We could just as well allocate the structure directly at
> probe with a drmm helper and fill it as we need to.


Yes, I wanted to keep it const, as we usually do for all function 
tables. I will use drmm_alloc for it.


-- 
With best wishes
Dmitry