[PATCH v2 00/12] coresight: Add CPU cluster funnel/replicator/tmc support

[yuanfang zhang]

On 12/18/2025 6:40 PM, Leo Yan wrote:
> Hi,
> 
> On Thu, Dec 18, 2025 at 12:09:40AM -0800, Coresight ML wrote:
> 
> [...]
> 
>> - Utilizing `smp_call_function_single()` to ensure register accesses
>>   (initialization, enablement, sysfs reads) are always executed on a
>>   powered CPU within the target cluster.
> 
> This is concerned as Mike suggested earlier.
> 
> Let me convert to a common question: how does the Linux kernel manage
> a power domain shared by multiple hardware modules?
> 
> A general solution is to bind a power domain (let's say PD1) to both
> module A (MOD_A) and module B (MOD_B).  Each time before accessing MOD_A
> or MOD_B, PD1 must be powered on first via the pm_runtime APIs, with
> its refcount increased accordingly.
> 
> My understanding is the problem in your case is that the driver fails to
> create a relationship between the funnel/replicator modules and the
> cluster power domain.  Instead, you are trying to use the CPUs in the
> same cluster as a delegate for power operations - when you want to
> access MOD_B, your wake up MOD_A which sharing the same power domain,
> only to turn on the PD_A in order to access MOD_B.
> 
> Have you discussed with the firmware and hardware engineers whether it
> is feasible to provide explicit power and clock control interfaces for
> the funnel and replicator modules?  I can imagine the cluster power
> domain's design might differ from other device power domains, but
> should not the hardware provide a sane design that allows software to
> control power for the access logic within it?
> 

It is due to the particular characteristics of the CPU cluster power domain.
Runtime PM for CPU devices works little different, it is mostly used to manage hierarchical
CPU topology (PSCI OSI mode) to talk with genpd framework to manage the last CPU handling in
cluster.
It doesn’t really send IPI to wakeup CPU device (It don’t have .power_on/.power_off) callback
implemented which gets invoked from .runtime_resume callback. This behavior is aligned with
the upstream Kernel.


> General speaking, using smp_call_function_single() makes sense if only
> when accessing logics within the CPU boundary.
> 
> P.s., currently you can use "taskset" as a temporary solution without
> any code change, something like:
> 
>   taskset -c 0 echo 1 > /sys/bus/coresight/devices/etm0/enable_source


This can address the runtime issue, but it does not resolve the problem during the probe phase.

thanks,
Yuanfang> 
> Thanks,
> Leo