[PATCH 3/4] arm64: dts: broadcom: bcm2712: fix RP1 endpoint PCI topology

[Andrea della Porta]

The node describing the RP1 endpoint currently uses a specific name
('rp1_nexus') that does not correctly reflect the PCI topology.

Update the DT with the correct topology and use generic node names.

Additionally, since the driver dropped overlay support in favor of a
fully described DT, rename '...-ovl-rp1.dts' to '...-base.dtsi' for
inclusion in the board DTB, as it is no longer compiled as a
standalone DTB.

Signed-off-by: Andrea della Porta <andrea.porta at suse.com>
---
The DTC compiler produces the following warning:

WARNING: DT compatible string vendor "pci1de4" appears un-documented -- check ./Documentation/devicetree/bindings/vendor-prefixes.yaml
#91: FILE: arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts:31:
                        compatible = "pci1de4,1";

I'm not sure wheter I should add that compatible to vendor-prefixes.yaml
or change the compatible to something already recognized as a vendor,
such as 'raspberrypi,pci1de4,1'.
I'd prefer the former to be consistent to what would be filled by enabling
CONFIG_PCI_DYNAMIC_OF_NODES. Any hint will be really appreciated.
---
 arch/arm64/boot/dts/broadcom/Makefile         |  1 -
 ...-ovl-rp1.dts => bcm2712-rpi-5-b-base.dtsi} |  0
 .../boot/dts/broadcom/bcm2712-rpi-5-b.dts     | 39 ++++++++++++-------
 3 files changed, 26 insertions(+), 14 deletions(-)
 rename arch/arm64/boot/dts/broadcom/{bcm2712-rpi-5-b-ovl-rp1.dts => bcm2712-rpi-5-b-base.dtsi} (100%)

diff --git a/arch/arm64/boot/dts/broadcom/Makefile b/arch/arm64/boot/dts/broadcom/Makefile
index 83d45afc6588e..d43901404c955 100644
--- a/arch/arm64/boot/dts/broadcom/Makefile
+++ b/arch/arm64/boot/dts/broadcom/Makefile
@@ -7,7 +7,6 @@ dtb-$(CONFIG_ARCH_BCM2835) += bcm2711-rpi-400.dtb \
 			      bcm2711-rpi-4-b.dtb \
 			      bcm2711-rpi-cm4-io.dtb \
 			      bcm2712-rpi-5-b.dtb \
-			      bcm2712-rpi-5-b-ovl-rp1.dtb \
 			      bcm2712-d-rpi-5-b.dtb \
 			      bcm2837-rpi-2-b.dtb \
 			      bcm2837-rpi-3-a-plus.dtb \
diff --git a/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b-ovl-rp1.dts b/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b-base.dtsi
similarity index 100%
rename from arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b-ovl-rp1.dts
rename to arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b-base.dtsi
diff --git a/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts b/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts
index 3e0319fdb93f7..2856082814462 100644
--- a/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts
+++ b/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts
@@ -1,22 +1,16 @@
 // SPDX-License-Identifier: (GPL-2.0 OR MIT)
 /*
- * bcm2712-rpi-5-b-ovl-rp1.dts is the overlay-ready DT which will make
- * the RP1 driver to load the RP1 dtb overlay at runtime, while
- * bcm2712-rpi-5-b.dts (this file) is the fully defined one (i.e. it
- * already contains RP1 node, so no overlay is loaded nor needed).
- * This file is intended to host the override nodes for the RP1 peripherals,
- * e.g. to declare the phy of the ethernet interface or the custom pin setup
- * for several RP1 peripherals.
- * This in turn is due to the fact that there's no current generic
- * infrastructure to reference nodes (i.e. the nodes in rp1-common.dtsi) that
- * are not yet defined in the DT since they are loaded at runtime via overlay.
+ * As a loose attempt to separate RP1 customizations from SoC peripherals
+ * definitioni, this file is intended to host the override nodes for the RP1
+ * peripherals, e.g. to declare the phy of the ethernet interface or custom
+ * pin setup.
  * All other nodes that do not have anything to do with RP1 should be added
- * to the included bcm2712-rpi-5-b-ovl-rp1.dts instead.
+ * to the included bcm2712-rpi-5-b-base.dtsi instead.
  */
 
 /dts-v1/;
 
-#include "bcm2712-rpi-5-b-ovl-rp1.dts"
+#include "bcm2712-rpi-5-b-base.dtsi"
 
 / {
 	aliases {
@@ -25,7 +19,26 @@ aliases {
 };
 
 &pcie2 {
-	#include "rp1-nexus.dtsi"
+	pci at 0,0 {
+		reg = <0x0 0x0 0x0 0x0 0x0>;
+		ranges;
+		bus-range = <0 1>;
+		device_type = "pci";
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		dev at 0,0 {
+			compatible = "pci1de4,1";
+			reg = <0x10000 0x0 0x0 0x0 0x0>;
+			ranges = <0x1 0x0 0x0 0x82010000 0x0 0x0 0x0 0x400000>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			#include "rp1-common.dtsi"
+		};
+	};
 };
 
 &rp1_eth {
-- 
2.35.3