[PATCH v7 5/5] arm64: dts: qcom: monaco-evk-camera: Add DT overlay

[Konrad Dybcio]

On 12/16/25 8:35 AM, Vladimir Zapolskiy wrote:
> On 12/16/25 08:22, Nihal Kumar Gupta wrote:
>> Monaco EVK board does not include a camera sensor in its default hardware
>> configuration. Introducing a device tree overlay to support optional
>> integration of the IMX577 sensor via CSIPHY1.
>>
>> Camera reset is handled through an I2C expander, and power is enabled
>> via TLMM GPIO74.
>>
>> An example media-ctl pipeline for the imx577 is:

[...]

> If only one of 3 defined from 4/5 regulators is used, do you really wish
> to describle all 3 in advance? You may consider to remove 2 currently unused
> GPIO controlled regulator descriptions, and squash this change with 4/5.

This is useful, if only to surely park them when unused.

Konrad