[PATCH] PCI: meson: Remove meson_pcie_link_up() timeout, message, speed check

[Manivannan Sadhasivam]

On Mon, 03 Nov 2025 16:19:26 -0600, Bjorn Helgaas wrote:
> Previously meson_pcie_link_up() only returned true if the link was in the
> L0 state.  This was incorrect because hardware autonomously manages
> transitions between L0, L0s, and L1 while both components on the link stay
> in D0.  Those states should all be treated as "link is active".
> 
> Returning false when the device was in L0s or L1 broke config accesses
> because dw_pcie_other_conf_map_bus() fails if the link is down, which
> caused errors like this:
> 
> [...]

Applied, thanks!

[1/1] PCI: meson: Remove meson_pcie_link_up() timeout, message, speed check
      commit: 11647fc772e977c981259a63c4a2b7e2c312ea22

Best regards,
-- 
Manivannan Sadhasivam <mani at kernel.org>