[PATCH] arm64: dts: xilinx: Drop "label" property on dlg,slg7xl45106

[Rob Herring (Arm)]

The "label" property is not documented for the dlg,slg7xl45106. Nor is
it common to use for GPIO controllers. So drop it.

Signed-off-by: Rob Herring (Arm) <robh at kernel.org>
---
 arch/arm64/boot/dts/xilinx/zynqmp-sck-kd-g-revA.dtso | 1 -
 arch/arm64/boot/dts/xilinx/zynqmp-sck-kr-g-revA.dtso | 1 -
 arch/arm64/boot/dts/xilinx/zynqmp-sck-kr-g-revB.dtso | 1 -
 3 files changed, 3 deletions(-)

diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kd-g-revA.dtso b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kd-g-revA.dtso
index 02be5e1e8686..d0230da47068 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kd-g-revA.dtso
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kd-g-revA.dtso
@@ -75,7 +75,6 @@ u3: ina260 at 40 { /* u3 */
 	slg7xl45106: gpio at 11 { /* u13 - reset logic */
 		compatible = "dlg,slg7xl45106";
 		reg = <0x11>;
-		label = "resetchip";
 		gpio-controller;
 		#gpio-cells = <2>;
 		gpio-line-names = "USB0_PHY_RESET_B", "",
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kr-g-revA.dtso b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kr-g-revA.dtso
index b92dcb86e87e..5d1f031bbd89 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kr-g-revA.dtso
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kr-g-revA.dtso
@@ -103,7 +103,6 @@ u14: ina260 at 40 { /* u14 */
 	slg7xl45106: gpio at 11 { /* u19 - reset logic */
 		compatible = "dlg,slg7xl45106";
 		reg = <0x11>;
-		label = "resetchip";
 		gpio-controller;
 		#gpio-cells = <2>;
 		gpio-line-names = "USB0_PHY_RESET_B", "USB1_PHY_RESET_B",
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kr-g-revB.dtso b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kr-g-revB.dtso
index 99ad220d13d6..1d5c95bd6073 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kr-g-revB.dtso
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kr-g-revB.dtso
@@ -104,7 +104,6 @@ u14: ina260 at 40 { /* u14 */
 	slg7xl45106: gpio at 11 { /* u19 - reset logic */
 		compatible = "dlg,slg7xl45106";
 		reg = <0x11>;
-		label = "resetchip";
 		gpio-controller;
 		#gpio-cells = <2>;
 		gpio-line-names = "USB0_PHY_RESET_B", "USB1_PHY_RESET_B",
-- 
2.51.0