[PATCH v4 0/5] arm64: dts: freescale: add support for the GOcontroll Moduline IV/Mini
Maud Spierings
maudspierings at gocontroll.com
Tue Dec 16 00:22:28 PST 2025
Gentle ping after a month of inactivity.
Kind regards,
Maud
On 11/17/25 16:01, Maud Spierings via B4 Relay wrote:
> Add initial support for the Moduline IV and Moduline Mini embedded
> controllers.
>
> These systems are powered by the Ka-Ro Electronics tx8m-1610 COM, which
> features an imx8mm SoC.
>
> Signed-off-by: Maud Spierings <maudspierings at gocontroll.com>
> ---
> Changes in v4:
> - Fix BUCK6 property order
> - Change the BUCK6 min/max voltage to match the dram specs (Lothar)
> - Make it clear that the two systems are based on a SoM in commit
> message of the dt-bindings (Conor)
> - Drop merged PMIC fix (Matti, Mark)
> - Link to v3: https://lore.kernel.org/r/20251030-mini_iv-v3-0-ef56c4d9f219@gocontroll.com
>
> Changes in v3:
> - Add patch fixing the pmic driver
> - Use the proper feedback properties for BUCK6
> - Slightly rework the compatibles, acked by conor dropped
> - Add missing CAN interface supplies, remove the leftover comment
> - Add missing vled-supply
> - Add missing ethernet phy interrupt (doesn't work)
> - Fix the cs-gpios properties in all spi interfaces
> - Fix the order of properties in all spi interfaces
> - Remove unused labels for regulators of the PMIC
> - Link to v2: https://lore.kernel.org/r/20251022-mini_iv-v2-0-20af8f9aac14@gocontroll.com
>
> Changes in v2:
> - Fix allignment issue in imx8mm-tx8m-1610.dtsi (fec1)
> - Move phy-reset into fec (works better in barebox)
> - Make the gpio-line-names groups of four on every line
> - Link to v1: https://lore.kernel.org/r/20251009-mini_iv-v1-0-f3889c492457@gocontroll.com
>
> ---
> Maud Spierings (5):
> dt-bindings: arm: fsl: Add GOcontroll Moduline IV/Mini
> arm64: dts: imx8mm: Add pinctrl config definitions
> arm64: dts: freescale: add Ka-Ro Electronics tx8m-1610 COM
> arm64: dts: freescale: Add the GOcontroll Moduline IV
> arm64: dts: freescale: Add the GOcontroll Moduline Mini
>
> Documentation/devicetree/bindings/arm/fsl.yaml | 8 +
> arch/arm64/boot/dts/freescale/Makefile | 3 +
> arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h | 33 +
> .../imx8mm-tx8m-1610-moduline-iv-306-d.dts | 800 +++++++++++++++++++++
> .../imx8mm-tx8m-1610-moduline-mini-111.dts | 688 ++++++++++++++++++
> .../arm64/boot/dts/freescale/imx8mm-tx8m-1610.dtsi | 444 ++++++++++++
> 6 files changed, 1976 insertions(+)
> ---
> base-commit: 7c3ba4249a3604477ea9c077e10089ba7ddcaa03
> change-id: 20251009-mini_iv-a05e5c2c1223
>
> Best regards,
More information about the linux-arm-kernel
mailing list