[PATCH v7 3/5] arm64: dts: qcom: monaco: Add camera MCLK pinctrl

[Vladimir Zapolskiy]

On 12/16/25 08:22, Nihal Kumar Gupta wrote:
> Define pinctrl definitions to enable camera master clocks on Monaco.
> 
> Signed-off-by: Nihal Kumar Gupta <quic_nihalkum at quicinc.com>
> Signed-off-by: Vikram Sharma <quic_vikramsa at quicinc.com>
> ---
>   arch/arm64/boot/dts/qcom/monaco.dtsi | 21 +++++++++++++++++++++
>   1 file changed, 21 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/monaco.dtsi b/arch/arm64/boot/dts/qcom/monaco.dtsi
> index 4b2d8a449b00..ace09239d167 100644
> --- a/arch/arm64/boot/dts/qcom/monaco.dtsi
> +++ b/arch/arm64/boot/dts/qcom/monaco.dtsi
> @@ -5182,6 +5182,27 @@ tlmm: pinctrl at f100000 {
>   			#interrupt-cells = <2>;
>   			wakeup-parent = <&pdc>;
>   
> +			cam0_default: cam0-default-state {
> +				pins = "gpio67";
> +				function = "cam_mclk";
> +				drive-strength = <2>;
> +				bias-disable;
> +			};
> +
> +			cam1_default: cam1-default-state {
> +				pins = "gpio68";
> +				function = "cam_mclk";
> +				drive-strength = <2>;
> +				bias-disable;
> +			};
> +
> +			cam2_default: cam2-default-state {
> +				pins = "gpio69";
> +				function = "cam_mclk";
> +				drive-strength = <2>;
> +				bias-disable;
> +			};
> +
>   			cci0_0_default: cci0-0-default-state {
>   				sda-pins {
>   					pins = "gpio57";

Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy at linaro.org>

-- 
Best wishes,
Vladimir