[PATCH] ARM: dts: microchip: Drop usb_a9g20-dab-mmx.dtsi

[Rob Herring (Arm)]

This .dtsi file is not included anywhere in the tree and can't be
tested.

Signed-off-by: Rob Herring (Arm) <robh at kernel.org>
---
 .../boot/dts/microchip/usb_a9g20-dab-mmx.dtsi | 93 -------------------
 1 file changed, 93 deletions(-)
 delete mode 100644 arch/arm/boot/dts/microchip/usb_a9g20-dab-mmx.dtsi

diff --git a/arch/arm/boot/dts/microchip/usb_a9g20-dab-mmx.dtsi b/arch/arm/boot/dts/microchip/usb_a9g20-dab-mmx.dtsi
deleted file mode 100644
index 5b1d80c0ab26..000000000000
--- a/arch/arm/boot/dts/microchip/usb_a9g20-dab-mmx.dtsi
+++ /dev/null
@@ -1,93 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * calao-dab-mmx.dtsi - Device Tree Include file for Calao DAB-MMX Daughter Board
- *
- * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
- */
-
-/ {
-	ahb {
-		apb {
-			usart1: serial at fffb4000 {
-				status = "okay";
-			};
-
-			usart3: serial at fffd0000 {
-				status = "okay";
-			};
-		};
-	};
-
-	i2c-gpio at 0 {
-		status = "okay";
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		user_led1 {
-			label = "user_led1";
-			gpios = <&pioB 20 GPIO_ACTIVE_LOW>;
-		};
-
-/*
-* led already used by mother board but active as high
-*		user_led2 {
-*			label = "user_led2";
-*			gpios = <&pioB 21 GPIO_ACTIVE_LOW>;
-*		};
-*/
-		user_led3 {
-			label = "user_led3";
-			gpios = <&pioB 22 GPIO_ACTIVE_LOW>;
-		};
-
-		user_led4 {
-			label = "user_led4";
-			gpios = <&pioB 23 GPIO_ACTIVE_LOW>;
-		};
-
-		red {
-			label = "red";
-			gpios = <&pioB 24 GPIO_ACTIVE_LOW>;
-		};
-
-		orange {
-			label = "orange";
-			gpios = <&pioB 30 GPIO_ACTIVE_LOW>;
-		};
-
-		green {
-			label = "green";
-			gpios = <&pioB 31 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-
-		button-user-pb1 {
-			label = "user_pb1";
-			gpios = <&pioB 25 GPIO_ACTIVE_LOW>;
-			linux,code = <0x100>;
-		};
-
-		button-user-pb2 {
-			label = "user_pb2";
-			gpios = <&pioB 13 GPIO_ACTIVE_LOW>;
-			linux,code = <0x101>;
-		};
-
-		button-user-pb3 {
-			label = "user_pb3";
-			gpios = <&pioA 26 GPIO_ACTIVE_LOW>;
-			linux,code = <0x102>;
-		};
-
-		button-user-pb4 {
-			label = "user_pb4";
-			gpios = <&pioC 9 GPIO_ACTIVE_LOW>;
-			linux,code = <0x103>;
-		};
-	};
-};
-- 
2.51.0