[PATCH net-next v5 3/4] net: ftgmac100: Add RGMII delay support for AST2600

[Rob Herring]

On Sat, Dec 06, 2025 at 07:30:30PM +0100, Andrew Lunn wrote:
> > @@ -1907,6 +2179,10 @@ static int ftgmac100_probe(struct platform_device *pdev)
> >  		priv->rxdes0_edorr_mask = BIT(30);
> >  		priv->txdes0_edotr_mask = BIT(30);
> >  		priv->is_aspeed = true;
> > +		/* Configure RGMII delay if there are the corresponding compatibles */
> > +		err = ftgmac100_set_internal_delay(priv, &phy_intf);
> > +		if (err)
> > +			goto err_phy_connect;
> 
> Thinking forward to when you add 2700 support, i really think you need
> to break the probe up into helpers for 2500 and before, 2600 and in
> the future 2700. You currently have a couple of tests on the
> compatible which you can reduce to one.
> 
> In fact, this driver has 10 calls to of_device_is_compatible(). I
> think you should first refactor the code to list each compatible in
> ftgmac100_of_match[], and add a data structure which contains an enum
> of the MAC type. You can then transfer this to priv, and replace all
> the of_device_is_compatible() tests to just look at the enum value.

Better yet, define a structure which defines the different settings 
directly. Such as:

priv->rxdes0_edorr_mask
priv->txdes0_edotr_mask
priv->is_aspeed

And anything else needed...

Rob