[PATCH 06/12] arm64: dts: mediatek: mt8390-genio-common: Enable HDMI output

[Louis-Alexis Eyraud]

From: AngeloGioacchino Del Regno <angelogioacchino.delregno at collabora.com>

Add a node for the HDMI-A connector found on this board, then
configure the display pipeline and enable the required DPI1
interface, HDMI controller, its integrated DDC and the HDMI
PHY to enable support for the HDMI output provided by these EVKs.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno at collabora.com>
[Louis-Alexis Eyraud: reworded subject and description]
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud at collabora.com>
---
 .../boot/dts/mediatek/mt8390-genio-common.dtsi     | 141 +++++++++++++++++++++
 1 file changed, 141 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt8390-genio-common.dtsi b/arch/arm64/boot/dts/mediatek/mt8390-genio-common.dtsi
index a2cdecd2b9034e2f295d817e846d6ed1845e686a..5fa1f5fbad18f2bf9b153ae9a029829641e43023 100644
--- a/arch/arm64/boot/dts/mediatek/mt8390-genio-common.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8390-genio-common.dtsi
@@ -55,6 +55,20 @@ dmic_codec: dmic-codec {
 		wakeup-delay-ms = <30>;
 	};
 
+	connector {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+		type = "a";
+		ddc-i2c-bus = <&hdmi_ddc>;
+		hdmi-pwr-supply = <&hdmi_phy>;
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi0_out>;
+			};
+		};
+	};
+
 	firmware {
 		optee {
 			compatible = "linaro,optee-tz";
@@ -328,6 +342,18 @@ &dither0_out {
 	remote-endpoint = <&dsi0_in>;
 };
 
+&dpi1 {
+	status = "okay";
+};
+
+&dpi1_in {
+	remote-endpoint = <&merge5_out>;
+};
+
+&dpi1_out {
+	remote-endpoint = <&hdmi0_in>;
+};
+
 &gamma0_out {
 	remote-endpoint = <&postmask0_in>;
 };
@@ -337,6 +363,55 @@ &gpu {
 	status = "okay";
 };
 
+&ethdr0 {
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port at 0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			ethdr0_in: endpoint at 1 {
+				reg = <1>;
+				remote-endpoint = <&vdosys1_ep_ext>;
+			};
+		};
+
+		port at 1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			ethdr0_out: endpoint at 1 {
+				reg = <1>;
+				remote-endpoint = <&merge5_in>;
+			};
+		};
+	};
+};
+
+&hdmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_pins>;
+	status = "okay";
+};
+
+&hdmi0_in {
+	remote-endpoint = <&dpi1_out>;
+};
+
+&hdmi0_out {
+	remote-endpoint = <&hdmi_connector_in>;
+};
+
+&hdmi_phy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_vreg_pins>;
+	status = "okay";
+};
+
 &i2c0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c0_pins>;
@@ -475,6 +550,35 @@ &i2c6 {
 	status = "okay";
 };
 
+&merge5 {
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port at 0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			merge5_in: endpoint at 1 {
+				reg = <1>;
+				remote-endpoint = <&ethdr0_out>;
+			};
+		};
+
+		port at 1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			merge5_out: endpoint at 1 {
+				reg = <1>;
+				remote-endpoint = <&dpi1_in>;
+			};
+		};
+	};
+};
+
 &mfg0 {
 	domain-supply = <&mt6359_vproc2_buck_reg>;
 };
@@ -727,6 +831,31 @@ pins-txd {
 		};
 	};
 
+	hdmi_vreg_pins: hdmi-vreg-pins {
+		pins-pwr {
+			pinmux = <PINMUX_GPIO50__FUNC_O_HDMITX20_PWR5V>;
+			bias-disable;
+		};
+	};
+
+	hdmi_pins: hdmi-pins {
+		pins-hotplug {
+			pinmux = <PINMUX_GPIO51__FUNC_I0_HDMITX20_HTPLG>;
+			bias-pull-down;
+		};
+
+		pins-cec {
+			pinmux = <PINMUX_GPIO52__FUNC_B1_HDMITX20_CEC>;
+			bias-disable;
+		};
+
+		pins-ddc {
+			pinmux = <PINMUX_GPIO53__FUNC_B1_HDMITX20_SCL>,
+				 <PINMUX_GPIO54__FUNC_B1_HDMITX20_SDA>;
+			drive-strength = <10>;
+		};
+	};
+
 	i2c0_pins: i2c0-pins {
 		pins {
 			pinmux = <PINMUX_GPIO56__FUNC_B1_SDA0>,
@@ -1286,6 +1415,18 @@ connector {
 	};
 };
 
+&vdosys1 {
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vdosys1_ep_ext: endpoint at 1 {
+			reg = <1>;
+			remote-endpoint = <&ethdr0_in>;
+		};
+	};
+};
+
 &xhci0 {
 	status = "okay";
 };

-- 
2.52.0