[PATCH net v2] net: mdio: aspeed: add dummy read to avoid read-after-write issue

[Jacky Chou]

The Aspeed MDIO controller may return incorrect data when a read operation
follows immediately after a write. Due to a controller bug, the subsequent
read can latch stale data, causing the polling logic to terminate earlier
than expected.

To work around this hardware issue, insert a dummy read after each write
operation. This ensures that the next actual read returns the correct
data and prevents premature polling exit.

This workaround has been verified to stabilize MDIO transactions on
affected Aspeed platforms.

Fixes: f160e99462c6 ("net: phy: Add mdio-aspeed")
Signed-off-by: Jacky Chou <jacky_chou at aspeedtech.com>
---
Changes in v2:
- Updated the Fixes: tag
- Link to v1: https://lore.kernel.org/r/20251208-aspeed_mdio_add_dummy_read-v1-1-0a1861ad2161@aspeedtech.com
---
 drivers/net/mdio/mdio-aspeed.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/net/mdio/mdio-aspeed.c b/drivers/net/mdio/mdio-aspeed.c
index e55be6dc9ae7..7d11add3c05e 100644
--- a/drivers/net/mdio/mdio-aspeed.c
+++ b/drivers/net/mdio/mdio-aspeed.c
@@ -63,6 +63,13 @@ static int aspeed_mdio_op(struct mii_bus *bus, u8 st, u8 op, u8 phyad, u8 regad,
 
 	iowrite32(ctrl, ctx->base + ASPEED_MDIO_CTRL);
 
+	/* Workaround for read-after-write issue.
+	 * The controller may return stale data if a read follows immediately
+	 * after a write. A dummy read forces the hardware to update its
+	 * internal state, ensuring that the next real read returns correct data.
+	 */
+	(void)ioread32(ctx->base + ASPEED_MDIO_CTRL);
+
 	return readl_poll_timeout(ctx->base + ASPEED_MDIO_CTRL, ctrl,
 				!(ctrl & ASPEED_MDIO_CTRL_FIRE),
 				ASPEED_MDIO_INTERVAL_US,

---
base-commit: 0373d5c387f24de749cc22e694a14b3a7c7eb515
change-id: 20251208-aspeed_mdio_add_dummy_read-587ab8808817

Best regards,
-- 
Jacky Chou <jacky_chou at aspeedtech.com>