[PATCH v2] PCI: dwc: Make Link Up IRQ logic handle already powered on PCIe switches

[Krishna Chaitanya Chundru]

On 12/9/2025 10:42 AM, Niklas Cassel wrote:
> Hello Krishna,
>
> Currently:
> For controllers with Link Up IRQ support, the pci_host_probe() call (which
> will perform PCI Configuration Space reads) is done without any of the
> delays mandated by the PCIe specification.
>
> This seems quite bad.
>
> A device might not be fully initialized during during the time of these
> PCI Configuration Space reads, but might still return some bogus values
> that are actually different from the Configuration Space reads if done
> after respecting the delays mandated by the PCIe specification.
>
> I think the options are:
> 1) Keep the pci_host_probe() call in dw_pcie_host_init() for controllers
>     with Link Up IRQ support, but make sure that we respect the delays also
>     in this case.
> or
> 2) Remove the pci_host_probe() call from dw_pcie_host_init(), and make sure
>     that pci_host_probe() is done by the first Link Up IRQ
>     (i.e. what this patch does).
>
>
> One big thing with using the Link Up IRQ is to not do any delay during PCIe
> controller driver's probe(), which reduces startup time, exactly as your
> commit message in commit 36971d6c5a9a ("PCI: qcom: Don't wait for link if
> we can detect Link Up") explains.
> Therefore, I don't think that 1) is a good solution, so that leaves us with
> 2).
>
>
> If pwrctrl drivers are created as part of the pci_host_probe() call,
> I think that perhaps an alternative would be to create an explict
> pwrctrl_init() function, and let the PCI controller drivers that actually
> use pwrctrl call that from their probe().
> (And just remove the same from pci_host_probe() ?)
>
> In fact, looking at your suggested patches (that hasn't landed yet):
> [PATCH 3/5] PCI/pwrctrl: Add APIs for explicitly creating and destroying pwrctrl devices
> [PATCH 5/5] PCI/pwrctrl: Switch to the new pwrctrl APIs
>
> https://lore.kernel.org/linux-pci/20251124-pci-pwrctrl-rework-v1-5-78a72627683d@oss.qualcomm.com/
> https://lore.kernel.org/linux-pci/20251124-pci-pwrctrl-rework-v1-3-78a72627683d@oss.qualcomm.com/
>
> Seem to do exactly that:
> Call pci_pwrctrl_create_devices() explicitly from the PCIe controller drivers
> directly, and removes the pci_pwrctrl_create_device() call from pci_host_probe().
>
> So I don't really understand your concern with this series, at least not if
> it goes on top of your series:
> https://lore.kernel.org/linux-pci/20251124-pci-pwrctrl-rework-v1-0-78a72627683d@oss.qualcomm.com/
Hi Niklas,

If this series goes on top of the our series i.e pwrctrl rework series, 
I don't have any concerns.
My only concern is link up IRQ never fires if this patch goes before series.

- Krishna Chaitanya.
>
>
> Kind regards,
> Niklas