[PATCH v4] dt-bindings: arm: keystone: add boot_* mboxes to ti,sci

[Anshul Dalal]

On Mon Dec 8, 2025 at 11:50 AM IST, Krzysztof Kozlowski wrote:
> On Fri, Dec 05, 2025 at 11:45:43AM +0530, Anshul Dalal wrote:
>> The bootloader on K3 devices makes use of mailboxes as per the ROM spec
>> which might be different than one's available to the kernel (firmware
>> spec).
>> 
>> Therefore, this patch adds the missing mailbox entries to the DT binding
>> if the matching compatible is ti,am654-sci to represent the mailboxes
>> exposed by the hardware during boot for the purpose of loading the
>> firmware.
>> 
>> Signed-off-by: Anshul Dalal <anshuld at ti.com>
>> ---
>> Changes in v4:
>> - Make new boot_* mboxes conditional on ti,am654-sci compatible
>> - Link to v3: https://lore.kernel.org/r/20251112-k3_syscon_add_boot_mailboxes-v3-1-66155a4236dc@ti.com
>> 
>> Changes in v3:
>> - Drop [1/2] of the last patch series
>> - Update existing example with boot_* mailboxes instead of adding a new one
>> - Link to v2: https://lore.kernel.org/r/20251112-k3_syscon_add_boot_mailboxes-v2-0-aebc1e47b391@ti.com
>> 
>> Changes in v2:
>> - Remove maxItems entry
>> - Remove RFC tag from patch (added by mistake in v1)
>> - Document the new mailboxes in mboxes instead of mbox-names
>> - Provide example with all the mailboxes set
>> - Update commit title to have "ti,sci"
>> - Split into two patches
>> - Link to v1: https://lore.kernel.org/r/20251111-k3_syscon_add_boot_mailboxes-v1-1-529a27f21076@ti.com
>> ---
>>  .../devicetree/bindings/arm/keystone/ti,sci.yaml   | 50 +++++++++++++++++++---
>>  1 file changed, 43 insertions(+), 7 deletions(-)
>> 
>> diff --git a/Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml b/Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml
>> index 25a2b42105e5..d9eb2a81e539 100644
>> --- a/Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml
>> +++ b/Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml
>> @@ -51,15 +51,15 @@ properties:
>>      minItems: 1
>>  
>>    mbox-names:
>> +    minItems: 2
>> +    maxItems: 6
>>      description: |
>>        Specifies the mailboxes used to communicate with TI-SCI Controller
>>        made available from TI-SCI controller.
>> -    items:
>> -      - const: rx
>> -      - const: tx
>>  
>>    mboxes:
>>      minItems: 2
>> +    maxItems: 6
>>  
>>    ti,host-id:
>>      $ref: /schemas/types.yaml#/definitions/uint32
>> @@ -79,6 +79,42 @@ properties:
>>      type: object
>>      $ref: /schemas/reset/ti,sci-reset.yaml#
>>  
>> +if:
>> +  properties:
>> +    compatible:
>> +      contains:
>> +        const: ti,am654-sci
>> +then:
>> +  properties:
>> +    mbox-names:
>> +      minItems: 2
>
> Why is this list flexible?
>

The idea is to make the boot_* mboxes optional so the existing DTs that
only have rx and tx remain complaint. Also, the boot_notify mbox is not
supported by every SoC.

>> +      items:
>> +        - const: rx
>> +        - const: tx
>> +        - const: notify
>> +        - const: boot_rx
>> +        - const: boot_tx
>> +        - const: boot_notify
>
> So this list goes to top-level with minItems.
>
>> +    mboxes:
>> +      minItems: 2
>> +      items:
>> +        - description: RX thread
>> +        - description: TX thread
>> +        - description: Notify thread
>> +        - description: boot stage RX thread
>> +        - description: boot stage TX thread
>> +        - description: boot stage Notify thread
>
> This as well
>
>> +else:
>
> Best regards,
> Krzysztof