[PATCH] arm64: dts: imx95: Use GPU_CGC as core clock for GPU

[Rain Yang]

On Thu, Dec 04, 2025 at 04:25:38AM +0100, Marek Vasut wrote:
>On 12/4/25 4:01 AM, Rain Yang wrote:
>
>[...]
>> > > For the Linux working environment,
>> > > CLK_GPU and CLK_GPUAPB are always-on, while CLK_GPU_CGC can be gated off.
>> > > 
>> > > Regarding the IMX95_CLK_GPUAPB handle, my suggestion was based on the absence
>> > > of its frequency in any OPP entry within the frequency table. Removing it
>> > > could simplify the OPP handling logic and reduce unnecessary complexity.
>> > 
>> > If the clock can be disabled by SM, Linux has to make sure they are NOT
>> > disabled, so they must be described in DT, right ?
>> > 
>> > > [1] https://github.com/nxp-imx/linux-imx/commit/695f2bdc57b869ca5189313e4b5fa7eb5a12f622
>> Currently, only CLK_GPU_CGC shall be described in the Device Tree[1], as it can be gated.
>> The other clocks (CLK_GPU and CLK_GPUAPB) are always-on in the Linux environment,
>> so describing any of them in DT is not necessary and would not be proper in this context.
>
>Since this discussion is in fact unrelated to this bugfix, I would propose to
>fork the discussion into a separate patch. Can you please submit a patch for
>the GPUAPB clock ? Note that I believe GPUAPB clock have to be described in
>DT, if only because DT is a hardware description, and to make sure the GPUAPB
>clock are correctly enabled by the driver.

Okay, I’ll submit a patch later.
The commit message should reflect that only CLK_GPU_CGC is enabled.