[PATCH v2 2/3] remoteproc: imx_dsp_rproc: Rename macro to reflect multiple contexts

[Frank Li]

On Thu, Dec 04, 2025 at 02:28:24PM +0200, Iuliana Prodan (OSS) wrote:
> From: Iuliana Prodan <iuliana.prodan at nxp.com>
>
> Rename WAIT_FW_READY to WAIT_FW_CONFIRMATION and FEATURE_DONT_WAIT_FW_READY
> to FEATURE_SKIP_FW_CONFIRMATION. This way, the term CONFIRMATION covers:
> - waiting for firmware to confirm it is ready to start;
> - waiting for any other confirmation from firmware.
>
> Signed-off-by: Iuliana Prodan <iuliana.prodan at nxp.com>
> ---

Reviewed-by: Frank Li <Frank.Li at nxp.com>

> Changes since v1:
> - New commit
> ---
>  drivers/remoteproc/imx_dsp_rproc.c | 22 +++++++++++-----------
>  1 file changed, 11 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/remoteproc/imx_dsp_rproc.c b/drivers/remoteproc/imx_dsp_rproc.c
> index f51deaacc700..1f3a35756769 100644
> --- a/drivers/remoteproc/imx_dsp_rproc.c
> +++ b/drivers/remoteproc/imx_dsp_rproc.c
> @@ -38,15 +38,15 @@ MODULE_PARM_DESC(no_mailboxes,
>
>  /* Flag indicating that the remote is up and running */
>  #define REMOTE_IS_READY				BIT(0)
> -/* Flag indicating that the host should wait for a firmware-ready response */
> -#define WAIT_FW_READY				BIT(1)
> +/* Flag indicating that the host should wait for a firmware-confirmation response */
> +#define WAIT_FW_CONFIRMATION				BIT(1)
>  #define REMOTE_READY_WAIT_MAX_RETRIES		500
>
>  /*
>   * This flag is set in the DSP resource table's features field to indicate
> - * that the firmware requires the host NOT to wait for a FW_READY response.
> + * that the firmware requires the host NOT to wait for a FW_CONFIRMATION response.
>   */
> -#define FEATURE_DONT_WAIT_FW_READY		BIT(0)
> +#define FEATURE_SKIP_FW_CONFIRMATION		BIT(0)
>
>  /* att flags */
>  /* DSP own area */
> @@ -287,7 +287,7 @@ static int imx_dsp_rproc_ready(struct rproc *rproc)
>   * @avail: available space in the resource table
>   *
>   * Parse the DSP-specific resource entry and update flags accordingly.
> - * If the WAIT_FW_READY feature is set, the host must wait for the firmware
> + * If the WAIT_FW_CONFIRMATION feature is set, the host must wait for the firmware
>   * to signal readiness before proceeding with execution.
>   *
>   * Return: RSC_HANDLED if processed successfully, RSC_IGNORED otherwise.
> @@ -322,7 +322,7 @@ static int imx_dsp_rproc_handle_rsc(struct rproc *rproc, u32 rsc_type,
>
>  	/*
>  	 * For now, in struct fw_rsc_imx_dsp, version 0,
> -	 * only FEATURE_DONT_WAIT_FW_READY is valid.
> +	 * only FEATURE_SKIP_FW_CONFIRMATION is valid.
>  	 *
>  	 * When adding new features, please upgrade version.
>  	 */
> @@ -332,8 +332,8 @@ static int imx_dsp_rproc_handle_rsc(struct rproc *rproc, u32 rsc_type,
>  		return RSC_IGNORED;
>  	}
>
> -	if (imx_dsp_rsc->features & FEATURE_DONT_WAIT_FW_READY)
> -		priv->flags &= ~WAIT_FW_READY;
> +	if (imx_dsp_rsc->features & FEATURE_SKIP_FW_CONFIRMATION)
> +		priv->flags &= ~WAIT_FW_CONFIRMATION;
>
>  	return RSC_HANDLED;
>  }
> @@ -385,7 +385,7 @@ static int imx_dsp_rproc_start(struct rproc *rproc)
>  		return ret;
>  	}
>
> -	if (priv->flags & WAIT_FW_READY)
> +	if (priv->flags & WAIT_FW_CONFIRMATION)
>  		return imx_dsp_rproc_ready(rproc);
>
>  	return 0;
> @@ -1131,8 +1131,8 @@ static int imx_dsp_rproc_probe(struct platform_device *pdev)
>  	priv = rproc->priv;
>  	priv->rproc = rproc;
>  	priv->dsp_dcfg = dsp_dcfg;
> -	/* By default, host waits for fw_ready reply */
> -	priv->flags |= WAIT_FW_READY;
> +	/* By default, host waits for fw_confirmation reply */
> +	priv->flags |= WAIT_FW_CONFIRMATION;
>
>  	if (no_mailboxes)
>  		imx_dsp_rproc_mbox_init = imx_dsp_rproc_mbox_no_alloc;
> --
> 2.25.1
>