[PATCH 00/21] Clean and update tilcdc driver to support DRM_BRIDGE_ATTACH_NO_CONNECTOR

Swamil Jain s-jain1 at ti.com
Wed Dec 3 04:13:38 PST 2025



On 12/3/25 16:19, Kory Maincent wrote:
> On Tue, 2 Dec 2025 17:55:15 +0530
> Swamil Jain <s-jain1 at ti.com> wrote:
> 
>> Hi Kory,
>> Thanks for the series.
>>
>> On 11/26/25 23:05, Kory Maincent (TI.com) wrote:
>>> The starting point for this work was adding support for the HDMI cape:
>>> https://www.seeedstudio.com/Seeed-Studio-BeagleBone-Green-HDMI-Cape.html
>>> This will be sent in a later series.
>>>
>>> Initially, Miguel proposed modifying the ite-it66121 bridge to support
>>> the legacy behavior without the DRM_BRIDGE_ATTACH_NO_CONNECTOR flag:
>>> https://lore.kernel.org/lkml/20250909-it66121-fix-v1-1-bc79ca83df17@bootlin.com/
>>> This patch was NAK'd as we don't want to add more legacy code. Maxime
>>> requested that the tilcdc driver be updated to use
>>> DRM_BRIDGE_ATTACH_NO_CONNECTOR instead.
>>>
>>> While working on this update, I discovered that the tilcdc driver
>>> contained significant amounts of legacy code that needed cleaning.
>>> Since this driver was developed alongside the tda998x driver for
>>> several AM335x boards, the tda998x driver also required cleanup and
>>> support for the DRM_BRIDGE_ATTACH_NO_CONNECTOR flag.
>>>
>>> This series is based on the tilcdc fix sent to mainline:
>>> https://lore.kernel.org/lkml/20251125090546.137193-1-kory.maincent@bootlin.com/
>>>
>>> Patch 1-7: Convert tilcdc binding to YAML and remove the ti,tilcdc,panel
>>> 	   sub-binding and driver
>>> Patch 8-16: Clean up tilcdc driver
>>> Patch 17-19: Clean up tda998x driver
>>> Patch 20: Add DRM_BRIDGE_ATTACH_NO_CONNECTOR support to tda998x
>>> Patch 21: Add DRM_BRIDGE_ATTACH_NO_CONNECTOR support to tilcdc
>>>
>>> Signed-off-by: Kory Maincent (TI.com) <kory.maincent at bootlin.com>
>>> ---
>>> Kory Maincent (TI.com) (21):
>>>         dt-bindings: display: tilcdc: Convert to DT schema
>>>         dt-bindings: display: tilcdc: Add fifo-threshold property
>>>         drm/tilcdc: Remove simulate_vesa_sync flag
>>>         drm/tilcdc: Add support for DRM bus flags and simplify panel config
>>>         ARM: dts: omap: Bind panel to panel-dpi instead of ti,tilcdc,panel
>>> driver dt-bindings: display: tilcdc: Remove panel binding
>>>         drm/tilcdc: Remove tilcdc panel driver
>>>         drm/tilcdc: Remove component framework support
>>>         drm/tilcdc: Remove tilcdc_panel_info structure
>>>         drm/tilcdc: Remove redundant #endif/#ifdef in debugfs code
>>>         drm/tilcdc: Remove unused encoder and connector tracking arrays
>>>         drm/tilcdc: Rename external_encoder and external_connector to
>>> encoder and connector drm/tilcdc: Rename tilcdc_external to tilcdc_encoder
>>>         drm/tilcdc: Remove the useless module list support
>>>         drm/tilcdc: Modernize driver initialization and cleanup paths
>>>         drm/tilcdc: Remove the use of drm_device private_data
>>>         drm/bridge: tda998x: Remove component support
>>>         drm/bridge: tda998x: Move tda998x_create/destroy into probe and
>>> remove drm/bridge: tda998x: Remove useless tda998x_connector_destroy wrapper
>>>         drm/bridge: tda998x: Add support for DRM_BRIDGE_ATTACH_NO_CONNECTOR
>>>         drm/tilcdc: Add support for DRM_BRIDGE_ATTACH_NO_CONNECTOR
>>>
>>>    .../devicetree/bindings/display/tilcdc/panel.txt   |  66 ---
>>>    .../devicetree/bindings/display/tilcdc/tilcdc.txt  |  82 ----
>>>    .../devicetree/bindings/display/tilcdc/tilcdc.yaml | 103 +++++
>>>    arch/arm/boot/dts/ti/davinci/da850-evm.dts         |  26 +-
>>>    arch/arm/boot/dts/ti/omap/am335x-guardian.dts      |  25 +-
>>>    arch/arm/boot/dts/ti/omap/am335x-pdu001.dts        |  21 +-
>>>    arch/arm/boot/dts/ti/omap/am335x-pepper.dts        |  22 +-
>>>    arch/arm/boot/dts/ti/omap/am335x-sbc-t335.dts      |  25 +-
>>>    arch/arm/boot/dts/ti/omap/am335x-sl50.dts          |  25 +-
>>>    drivers/gpu/drm/bridge/tda998x_drv.c               | 251 ++++++------
>>>    drivers/gpu/drm/tilcdc/Makefile                    |   3 +-
>>>    drivers/gpu/drm/tilcdc/tilcdc_crtc.c               | 117 ++----
>>>    drivers/gpu/drm/tilcdc/tilcdc_drv.c                | 456
>>> +++++++-------------- drivers/gpu/drm/tilcdc/tilcdc_drv.h                |
>>> 88 +--- drivers/gpu/drm/tilcdc/tilcdc_encoder.c            |  93 +++++
>>>    .../tilcdc/{tilcdc_external.h => tilcdc_encoder.h} |   5 +-
>>>    drivers/gpu/drm/tilcdc/tilcdc_external.c           | 179 --------
>>>    drivers/gpu/drm/tilcdc/tilcdc_panel.c              | 408
>>> ------------------ drivers/gpu/drm/tilcdc/tilcdc_panel.h              |  15
>>> - drivers/gpu/drm/tilcdc/tilcdc_plane.c              |   2 +-
>>>    drivers/gpu/drm/tilcdc/tilcdc_regs.h               |   8 +-
>>>    21 files changed, 589 insertions(+), 1431 deletions(-)
>>> ---
>>> base-commit: 670bacfc7579bdd79a3069cfb5ab60a6a7923003
>>
>> I was trying to test the patches, unable to find the base-commit, are
>> you using drm-misc-next?
> 
> It is based on the tilcdc fix as explained in the cover letter.
> https://lore.kernel.org/lkml/20251125090546.137193-1-kory.maincent@bootlin.com/
> Therefore you won't be able to find this base commit hash.

Sorry I missed it. Thanks for pointing.

Regards,
Swamil.

> 
> Regards,




More information about the linux-arm-kernel mailing list