[PATCH 0/2] i.MX93 phyBOARD-Segin DisplayKit AV-02 Support

[Marco Felsch]

Hi,

this small series add the support for the phyBOARD-Segin DisplayKit
AV-02 evaluation kit. This patchset depends on the following patchsets:

 - https://lore.kernel.org/linux-arm-kernel/20251202-v6-18-topic-imx93-blkctrl-v2-0-e73501034adc@pengutronix.de/
 - https://lore.kernel.org/linux-arm-kernel/20251202-v6-18-topic-imx93-parallel-display-v7-0-2cce31d64608@pengutronix.de/

My test setup was:
- phyCORE-i.MX93 +
- phyBOARD-Segin + 
- DisplayKit

and I used 'modeset -r' to validate the display output.

Regards,
 Marco

Signed-off-by: Marco Felsch <m.felsch at pengutronix.de>
---
Andrej Picej (1):
      arm64: dts: imx93-phyboard-segin: Add peb-av-02 overlay

Marco Felsch (1):
      clk: imx: fracn-gppll: Add 332.60 MHz Support

 arch/arm64/boot/dts/freescale/Makefile             |   2 +
 .../freescale/imx93-phyboard-segin-peb-av-02.dtso  | 135 +++++++++++++++++++++
 drivers/clk/imx/clk-fracn-gppll.c                  |   1 +
 3 files changed, 138 insertions(+)
---
base-commit: 3a8660878839faadb4f1a6dd72c3179c1df56787
change-id: 20251202-v6-18-topic-imx93-phyboard-segin-av-02-display-c1687aa1ccf4

Best regards,
-- 
Marco Felsch <m.felsch at pengutronix.de>