[PATCH] ARM: dts: imx6q-ba16: fix RTC interrupt level

[Ian Ray]

RTC interrupt level should be set to "LOW". This was revealed by the
introduction of commit:

  f181987ef477 ("rtc: m41t80: use IRQ flags obtained from fwnode")

which changed the way IRQ type is obtained.

Fixes: 56c27310c1b4 ("ARM: dts: imx: Add Advantech BA-16 Qseven module")
Signed-off-by: Ian Ray <ian.ray at gehealthcare.com>
---
 arch/arm/boot/dts/nxp/imx/imx6q-ba16.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-ba16.dtsi b/arch/arm/boot/dts/nxp/imx/imx6q-ba16.dtsi
index 53013b12c2ec..02d66523668d 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6q-ba16.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-ba16.dtsi
@@ -337,7 +337,7 @@ rtc at 32 {
 		pinctrl-0 = <&pinctrl_rtc>;
 		reg = <0x32>;
 		interrupt-parent = <&gpio4>;
-		interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
 	};
 };
 
-- 
2.47.3