[PATCH] arm64: dts: rockchip: Add vcc-supply to SPI flash on Pinebook Pro

[Peter Robinson]

Apologies, I believe I've already sent this and it's been applied.

On Wed, 27 Aug 2025 at 15:27, Peter Robinson <pbrobinson at gmail.com> wrote:
>
> As described in the pinebookpro_v2.1_mainboard_schematic.pdf page 10,
> he SPI Flash's VCC connector is connected to VCC_3V0 power source.
>
> This fixes the following warning:
>
>   spi-nor spi1.0: supply vcc not found, using dummy regulator
>
> Fixes: 5a65505a69884 ("arm64: dts: rockchip: Add initial support for Pinebook Pro")
> Signed-off-by: Peter Robinson <pbrobinson at gmail.com>
> ---
>  arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts | 1 +
>  1 file changed, 1 insertion(+)
>
> diff --git a/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts b/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts
> index 5a8551d9ffe47..b33a1509a8e93 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts
> +++ b/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts
> @@ -959,6 +959,7 @@ spiflash: flash at 0 {
>                 reg = <0>;
>                 m25p,fast-read;
>                 spi-max-frequency = <10000000>;
> +               vcc-supply = <&vcc_3v0>;
>         };
>  };
>
> --
> 2.51.0
>