[PATCH] arm64: dts: rockchip: Add vcc-supply to SPI flash on Pinephone Pro

[Peter Robinson]

As documented in the PinephonePro-Schematic-V1.0-20211127.pdf,
page 11, the SPI Flash's VCC pin is connected to VCC_1V8 power
source. This fixes the following warning:

  spi-nor spi1.0: supply vcc not found, using dummy regulator

Signed-off-by: Peter Robinson <pbrobinson at gmail.com>
---
 arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts b/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts
index be90e049a302c..24e4365a2e588 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts
@@ -772,6 +772,7 @@ flash at 0 {
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <10000000>;
+		vcc-supply = <&vcc_1v8>;
 	};
 };
 
-- 
2.51.0