[PATCH v3 0/3] add sysfs nodes to configure TPDA's registers

[James Clark]

On 27/08/2025 11:55 am, Jie Gan wrote:
> Patchset 1 introduces configuration of the cross-trigger registers with
> appropriate values to enable proper generation of cross-trigger packets.
> 
> Patchset 2 introduces a logic to configure the TPDA_SYNCR register,
> which determines the frequency of ASYNC packet generation. These packets
> assist userspace tools in accurately identifying each valid packet.
> 
> Patchset 3 introduces a sysfs node to initiate a flush request for the
> specific port, forcing the data to synchronize and be transmitted to the
> sink device.
> 
> Changes in V3:
> 1. Optimizing codes according to James's comment.
> Link to V2 - https://lore.kernel.org/all/20250827042042.6786-1-jie.gan@oss.qualcomm.com/
> 
> Changes in V2:
> 1. Refactoring the code based on James's comment for optimization.
> Link to V1 - https://lore.kernel.org/all/20250826070150.5603-1-jie.gan@oss.qualcomm.com/
> 
> Tao Zhang (3):
>    coresight: tpda: add sysfs nodes for tpda cross-trigger configuration
>    coresight: tpda: add logic to configure TPDA_SYNCR register
>    coresight: tpda: add sysfs node to flush specific port
> 
>   .../testing/sysfs-bus-coresight-devices-tpda  |  50 ++++
>   drivers/hwtracing/coresight/coresight-tpda.c  | 278 ++++++++++++++++++
>   drivers/hwtracing/coresight/coresight-tpda.h  |  33 ++-
>   3 files changed, 360 insertions(+), 1 deletion(-)
>   create mode 100644 Documentation/ABI/testing/sysfs-bus-coresight-devices-tpda
> 

Reviewed-by: James Clark <james.clark at linaro.org>