[PATCH V2 3/3] arm64: dts: s32g: Add device tree information for the OCOTP driver

[Dan Carpenter]

Add the device tree information for the S32G On Chip One-Time
Programmable Controller (OCOTP) chip.

Signed-off-by: Dan Carpenter <dan.carpenter at linaro.org>
---
v2: change "ocotp: ocotp at 400a4000 {" to "ocotp: nvmem at 400a4000 {"

 arch/arm64/boot/dts/freescale/s32g2.dtsi | 7 +++++++
 arch/arm64/boot/dts/freescale/s32g3.dtsi | 7 +++++++
 2 files changed, 14 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/s32g2.dtsi b/arch/arm64/boot/dts/freescale/s32g2.dtsi
index 6a7cc7b33754..e8cfddabfc24 100644
--- a/arch/arm64/boot/dts/freescale/s32g2.dtsi
+++ b/arch/arm64/boot/dts/freescale/s32g2.dtsi
@@ -701,5 +701,12 @@ gic: interrupt-controller at 50800000 {
 			interrupt-controller;
 			#interrupt-cells = <3>;
 		};
+
+		ocotp: nvmem at 400a4000 {
+			compatible = "nxp,s32g2-ocotp";
+			reg = <0x400a4000 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
 	};
 };
diff --git a/arch/arm64/boot/dts/freescale/s32g3.dtsi b/arch/arm64/boot/dts/freescale/s32g3.dtsi
index 61ee08f0cfdc..8fe1fa35e9ac 100644
--- a/arch/arm64/boot/dts/freescale/s32g3.dtsi
+++ b/arch/arm64/boot/dts/freescale/s32g3.dtsi
@@ -765,6 +765,13 @@ gic: interrupt-controller at 50800000 {
 			      <0x50420000 0x2000>;
 			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
 		};
+
+		ocotp: nvmem at 400a4000 {
+			compatible = "nxp,s32g3-ocotp", "nxp,s32g2-ocotp";
+			reg = <0x400a4000 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
 	};
 
 	timer {
-- 
2.47.2