[PATCH v2 12/12] arm64: dts: imx8mp: Specify the number of channels for CSI-2 receivers

[Stefan Klug]

Hi Laurent,

Thank you for the patch. 

Quoting Laurent Pinchart (2025-08-21 02:09:44)
> The CSI-2 receivers in the i.MX8MP have 3 output channels. Specify this
> in the device tree, to enable support for more than one channel in
> drivers.
> 
> Signed-off-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>

Reviewed-by: Stefan Klug <stefan.klug at ideasonboard.com>
Tested-by: Stefan Klug <stefan.klug at ideasonboard.com>

Cheers,
Stefan

> ---
>  arch/arm64/boot/dts/freescale/imx8mp.dtsi | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> index bb24dba7338e..1e52840078df 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> @@ -1764,6 +1764,7 @@ mipi_csi_0: csi at 32e40000 {
>                                 assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_250M>,
>                                                          <&clk IMX8MP_CLK_24M>;
>                                 power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_MIPI_CSI2_1>;
> +                               fsl,num-channels = <3>;
>                                 status = "disabled";
>  
>                                 ports {
> @@ -1799,6 +1800,7 @@ mipi_csi_1: csi at 32e50000 {
>                                 assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_250M>,
>                                                          <&clk IMX8MP_CLK_24M>;
>                                 power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_MIPI_CSI2_2>;
> +                               fsl,num-channels = <3>;
>                                 status = "disabled";
>  
>                                 ports {
> -- 
> Regards,
> 
> Laurent Pinchart
> 
>