[PATCH v2 1/4] media: dt-bindings: nxp,imx8mq-mipi-csi2: Add i.MX8ULP compatible string

[Krzysztof Kozlowski]

On 22/08/2025 12:50, Guoniu Zhou wrote:
> The CSI-2 receiver in the i.MX8ULP is almost identical to the version
> present in the i.MX8QXP/QM. But have different reset and clock design,
> so add a device-specific compatible string for i.MX8ULP to handle the
> difference.
> 
> Signed-off-by: Guoniu Zhou <guoniu.zhou at nxp.com>
> ---
>  .../bindings/media/nxp,imx8mq-mipi-csi2.yaml       | 42 ++++++++++++++++++++--
>  1 file changed, 40 insertions(+), 2 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml b/Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml
> index 3389bab266a9adbda313c8ad795b998641df12f3..ca485d1d596c274eb7e1f3cdc39c61bb54cc0685 100644
> --- a/Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml
> +++ b/Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml
> @@ -21,7 +21,9 @@ properties:
>            - fsl,imx8mq-mipi-csi2
>            - fsl,imx8qxp-mipi-csi2
>        - items:
> -          - const: fsl,imx8qm-mipi-csi2
> +          - enum:
> +              - fsl,imx8ulp-mipi-csi2
> +              - fsl,imx8qm-mipi-csi2

That;s some sort of random change. Previously code was correctly sorted
- u > q... now it is not

>            - const: fsl,imx8qxp-mipi-csi2
>  
>    reg:
> @@ -39,12 +41,19 @@ properties:
>                       clock that the RX DPHY receives.
>        - description: ui is the pixel clock (phy_ref up to 333Mhz).
>                       See the reference manual for details.
> +      - description: pclk is the lpav bus clock of i.MX8ULP. It provides
> +                     clock to CSI_REG module.
> +                     (see section "4.5.4 Peripheral clock diagrams,
> +                      Figure 76 MIPI CSI clocking" in IMX8ULPRM REV1)
> +    minItems: 3
>  
>    clock-names:
>      items:
>        - const: core
>        - const: esc
>        - const: ui
> +      - const: pclk
> +    minItems: 3
>  
>    power-domains:
>      maxItems: 1
> @@ -125,19 +134,48 @@ required:
>    - ports
>  
>  allOf:
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - fsl,imx8ulp-mipi-csi2
> +    then:
> +      properties:
> +        reg:
> +          minItems: 2
> +        resets:
> +          maxItems: 2
> +          minItems: 2

minItems goes before max.

> +        clocks:
> +          minItems: 4
> +        clock-names:
> +          minItems: 4
> +
>    - if:
>        properties:
>          compatible:
>            contains:
>              enum:
>                - fsl,imx8qxp-mipi-csi2
> +          not:
> +            contains:
> +              enum:
> +                - fsl,imx8ulp-mipi-csi2
>      then:
>        properties:
>          reg:
>            minItems: 2
>          resets:
>            maxItems: 1
> -    else:
> +
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - fsl,imx8mq-mipi-csi2
> +    then:
>        properties:
>          reg:
>            maxItems: 1

I don't see what we asked you for - restrict other variants.

Answer previous review:

"Or explain why old hardware has now 4
clocks. That explanation is missing."

> 


Best regards,
Krzysztof