[PATCH v2 05/12] media: imx-mipi-csis: Rename register macros to match reference manual

[Frank Li]

On Thu, Aug 21, 2025 at 03:09:37AM +0300, Laurent Pinchart wrote:
> The CSIS driver uses register macro names that do not match the
> reference manual of the i.MX7[DS] and i.MX8M[MNP] SoCs in which the CSIS
> is integrated. Rename them to match the documentation, making the code
> easier to read alongside the reference manuals.
>
> One of the misnamed register fields is MIPI_CSIS_INT_SRC_ERR_UNKNOWN,
> which led to the corresponding event being logged as "Unknown Error".
> The correct register field name is MIPI_CSIS_INT_SRC_ERR_ID, documented
> as "Unknown ID error". Update the event description accordingly.
>
> While at it, also replace a few *_OFFSET macros with parametric macros
> for consistency, and add the missing MIPI_CSIS_ISP_RESOL_VRESOL and
> MIPI_CSIS_ISP_RESOL_HRESOL register field macros.
>
> Signed-off-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
> ---
>  drivers/media/platform/nxp/imx-mipi-csis.c | 69 +++++++++++-----------
>  1 file changed, 36 insertions(+), 33 deletions(-)
>
> diff --git a/drivers/media/platform/nxp/imx-mipi-csis.c b/drivers/media/platform/nxp/imx-mipi-csis.c
> index 894d12fef519..1ca327e6be00 100644
> --- a/drivers/media/platform/nxp/imx-mipi-csis.c
> +++ b/drivers/media/platform/nxp/imx-mipi-csis.c
> @@ -55,13 +55,13 @@
>  /* CSIS common control */
>  #define MIPI_CSIS_CMN_CTRL			0x04
>  #define MIPI_CSIS_CMN_CTRL_UPDATE_SHADOW	BIT(16)
> -#define MIPI_CSIS_CMN_CTRL_INTER_MODE		BIT(10)
> +#define MIPI_CSIS_CMN_CTRL_INTERLEAVE_MODE_NONE	(0 << 10)
> +#define MIPI_CSIS_CMN_CTRL_INTERLEAVE_MODE_DT	(1 << 10)

BIT(10)?

> +#define MIPI_CSIS_CMN_CTRL_LANE_NUMBER(n)	((n) << 8)
> +#define MIPI_CSIS_CMN_CTRL_LANE_NUMBER_MASK	(3 << 8)

GEN_MASK() is better here, And below other registers.

Frank
>  #define MIPI_CSIS_CMN_CTRL_UPDATE_SHADOW_CTRL	BIT(2)
> -#define MIPI_CSIS_CMN_CTRL_RESET		BIT(1)
> -#define MIPI_CSIS_CMN_CTRL_ENABLE		BIT(0)
> -
> -#define MIPI_CSIS_CMN_CTRL_LANE_NR_OFFSET	8
> -#define MIPI_CSIS_CMN_CTRL_LANE_NR_MASK		(3 << 8)
> +#define MIPI_CSIS_CMN_CTRL_SW_RESET		BIT(1)
> +#define MIPI_CSIS_CMN_CTRL_CSI_EN		BIT(0)
>
>  /* CSIS clock control */
...

> --
> Regards,
>
> Laurent Pinchart
>