[PATCH 0/4] Add cpufreq and USB support for AM62D2

[Raghavendra, Vignesh]

On 8/20/2025 2:03 PM, Paresh Bhagat wrote:
> This patch series introduces following changes:
> 
> * Patch 1 fixes the register length in main_pmx/padconfig for AM62D
>  and AM62A.
> 
> * Patch 2 enables USB support for AM62D2-EVM by adding pinmux and device
>  tree nodes.
> 
> * Patch 3 adds AM62D2 SoC to cpufreq-dt-platdev blacklist so that
>  cpufreq is handled by the ti-cpufreq driver instead of the
>  generic cpufreq-dt driver.
> 
> * Patch 4 extends ti-cpufreq to register AM62D2 SoC support by
>  reusing the am62a7_soc_data.

Please don't randomly mix patches into single series. Here patches 1/4
and 2/4 have no bearing on cpufreq driver changes in 3/4 and 4/4. They
even go through different trees.

> 
> Boot Logs-
> https://gist.github.com/paresh-bhagat12/e29d33c3fd92ff17580edf1441ece9f9
> 
> Tech Ref Manual-https://www.ti.com/lit/pdf/sprujd4
> Schematics Link-https://www.ti.com/lit/zip/sprcal5
> 
> Paresh Bhagat (3):
>   arm64: dts: ti: k3-am62d2-evm: Enable USB support
>   cpufreq: dt-platdev: Blacklist ti,am62d2 SoC
>   cpufreq: ti: Add support for AM62D2
> 
> Vibhore Vardhan (1):
>   arm64: dts: ti: k3-am62a-main: Fix pinctrl properties
> 
>  arch/arm64/boot/dts/ti/k3-am62a-main.dtsi |  2 +-
>  arch/arm64/boot/dts/ti/k3-am62d2-evm.dts  | 21 +++++++++++++++++++++
>  drivers/cpufreq/cpufreq-dt-platdev.c      |  1 +
>  drivers/cpufreq/ti-cpufreq.c              |  2 ++
>  4 files changed, 25 insertions(+), 1 deletion(-)
>