[PATCH v2 02/12] media: imx-mipi-csis: Simplify access to source pad

[Laurent Pinchart]

The mipi_csis_calculate_params() function needs to access the pad of the
connected source. The pad is already available in csis->source.pad, but
the function takes a convoluted path by getting the pad index and
indexing the source subdev's pads array. Simplify it.

Signed-off-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
---
 drivers/media/platform/nxp/imx-mipi-csis.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/media/platform/nxp/imx-mipi-csis.c b/drivers/media/platform/nxp/imx-mipi-csis.c
index 2beb5f43c2c0..46f93cd677e3 100644
--- a/drivers/media/platform/nxp/imx-mipi-csis.c
+++ b/drivers/media/platform/nxp/imx-mipi-csis.c
@@ -579,13 +579,11 @@ static void __mipi_csis_set_format(struct mipi_csis_device *csis,
 static int mipi_csis_calculate_params(struct mipi_csis_device *csis,
 				      const struct csis_pix_format *csis_fmt)
 {
-	struct media_pad *src_pad =
-		&csis->source.sd->entity.pads[csis->source.pad->index];
 	s64 link_freq;
 	u32 lane_rate;
 
 	/* Calculate the line rate from the pixel rate. */
-	link_freq = v4l2_get_link_freq(src_pad, csis_fmt->width,
+	link_freq = v4l2_get_link_freq(csis->source.pad, csis_fmt->width,
 				       csis->bus.num_data_lanes * 2);
 	if (link_freq < 0) {
 		dev_err(csis->dev, "Unable to obtain link frequency: %d\n",
-- 
Regards,

Laurent Pinchart