[PATCH 1/2] arm64: dts: rockchip: Fix wifi interrupts flag on Sakura Pi RK3308B

[Krzysztof Kozlowski]

GPIO_ACTIVE_x flags are not correct in the context of interrupt flags.
These are simple defines so they could be used in DTS but they will not
have the same meaning: GPIO_ACTIVE_HIGH = 0 = IRQ_TYPE_NONE.

Correct the interrupt flags, assuming the author of the code wanted same
logical behavior behind the name "ACTIVE_xxx", this is:
  ACTIVE_HIGH  => IRQ_TYPE_LEVEL_HIGH

Fixes: 79f2a1702441 ("arm64: dts: rockchip: add DTs for Sakura Pi RK3308B")
Cc: <stable+noautosel at kernel.org> # Needs testing, because actual level is just a guess
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>

---

Please kindly test... Not cc-ing stable on purpose, because this might
have impact, so needs actual testing.
---
 arch/arm64/boot/dts/rockchip/rk3308-sakurapi-rk3308b.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3308-sakurapi-rk3308b.dts b/arch/arm64/boot/dts/rockchip/rk3308-sakurapi-rk3308b.dts
index f9f633aebb64..aee6643e33ab 100644
--- a/arch/arm64/boot/dts/rockchip/rk3308-sakurapi-rk3308b.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3308-sakurapi-rk3308b.dts
@@ -199,7 +199,7 @@ brcmf: wifi at 1 {
 		compatible = "brcm,bcm43455-fmac", "brcm,bcm4329-fmac";
 		reg = <1>;
 		interrupt-parent = <&gpio0>;
-		interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>;
+		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "host-wake";
 		pinctrl-names = "default";
 		pinctrl-0 = <&wifi_host_wake>;
-- 
2.48.1